Jenn-Air Logo

Jenn-Air Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 473 Products
  • 27K Answers
  • 697K Views

i had the exact same issue. it's a broken latch mechanism, and is a fairly common problem.

i bought the part at my local repair shop for $45 (you can find it online for $30). it literally took 10 minutes.

you need to right size bit to remove the 10 bolts on the interior of the door. once you have those out, the latch slides right out of the top. there are 2 electrical connectors (careful - you can get a shock. disconnect the 2 connectors, reconnect to the new one, and zip your 10 bolts back in. super easy

Jenn-Air 24 in.... | Answered 2 days ago


Contact JENN-AIR directly to inquire.

Jenn-Air... | Answered on Mar 17, 2019


Request the wiring diagram (not a schematic) directly from Jenn-Air.

Jenn-Air... | Answered on Mar 17, 2019


No. They dont light up.

Jenn-Air JEC8430... | Answered on Mar 13, 2019


In case anyone else encounters this problem here's what
worked for me. I had this happen last night and came here
searching for answers. It did not unloosen on it's own
after being left overnight. Finally this morning I came up
with something that worked for me. Shoot the lid all
around with a hairdryer and use a towel to keep seeing if
it has loosened up enough to move. After a few miuntes of
spraying it with the heat it stared sliding around and then
came up.

Jenn-Air JED8430... | Answered on Mar 02, 2019


Hi! Please check the troubleshooting part of the manual to a similar JENN-AIR fridge https://manualsbrain.com/en/manuals/947419/?page=15

Jenn-Air... | Answered on Feb 28, 2019


WE CAN NOT AS WE ARE NOT GAS SUPPLIERS HERE AND DO NOT RECOMMEND ANY DIY-ING FOR THEM GAS BLOWS UP WHEN DONE WRONG YOU SEE

Jenn-Air Kitchen... | Answered on Feb 23, 2019


hello, this unit does not have a fuse or thermostat to shut it down. it has to be the house breaker or wiring.

Jenn-Air JED8430... | Answered on Feb 21, 2019


FR Second oven error sensed

The unit never detected a sufficient rise in temperature in the second oven.

Jenn-Air Ovens | Answered on Jan 24, 2019


slow lighting is not all that uncommon on these ranges. Make sure the burners are clean and that you can see the spark at each ignitor. If that is OK, check the gas pressure to the burners.

Jenn-Air Kitchen... | Answered on Jan 20, 2019


The grease filter is in the center between the lights. See the interior and ventilation diagram available here: https://www.searspartsdirect.com/model-number/jmv9196cs3/1266/0123370.html . However, you might have this: https://www.partselect.com/Models/JMV9196CS3/Sections/04-Interior-And-Ventilation-Parts/?ModelID=7548870&ModelNum=JMV9196CS3&mfgModelNum=&ManufactureID=1&Selected=0794E2BFBF59CB9582BAA592BE0124B3C5F48AE9.gif&Position=4&mfg=Maytag&Type=&Mark=4 . The base (33) is secured by the door hinge (part 32). I'd suggest you try pushing up on the sides of the base and seeing if it will then rotate down. Unfortunately, I don't see any details about Jennaire microwaves with this type of base.

I hope this helps.

Cindy Wells

Jenn-Air JennAir... | Answered on Jan 08, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Jenn-Air Experts

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Marvin
Marvin

Level 3 Expert

84027 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Jenn-Air Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...