Hello, i have problem with
Yes if the rear propeller does not work the helicopter cannot be made to turn around. So it is important that the rear rotor works.
Now make sure that the drive is working to let the motor work , if controlled by the remote make sure the remote command works or is a fault in the remote.
Check the mechanics of the rotor movement. reset.
12/31/2010 11:36:14 AM •
JCPenney...
•
Answered
on Dec 31, 2010
I have put my sons telescope together but we
Looking through a telescope requires some understanding. First, It is an extremely powerful magnifier. So you could be looking next to a star and not see a thing.
So here is the best way to set up the scope for observing.
First, Find the moon as it is the easiest to view.
2nd USE THE SMALL FINDER SCOPE with it's cross hairs (if it has them) to locate the moon. It may have to be adjusted to be accurate itself.
3rd Set up the main section of the telescope with the lowest power magnification possible. Don't use the Barlow lens yet.
4th Make sure there are no lens caps in the wrong places.
After you have set it up so that you can locate the moon with the lowest possible magnification of the main scope. Use it to refine the adjustments on the finder scope (if it's possible).
Happy star finding.
P.S. There are some excellent software programs that help you identify some of the objects in the heavens.
Best,
Mark
Assembly instructions
I have some basic instructions for cribs in general, I hope it helps.
http://www.babeetenda.com/cribinst.htm
Of coarse there may be slight differences. If you listed the brand, I could see if there are proper instructions for it.
I have an Armitron 40/8172
Push the mode button until you get to the AL function (alarm). On the right hand side of the dial where you would normally see the seconds go by in the small round bezel, you will see a "--" or a "-1" or "-2" etc., these are the individual alarm programs. Cycle through them with the EL button and turn off/on the individual alarms with the ST/SP button as needed.
11/15/2010 5:18:48 PM •
JCPenney...
•
Answered
on Nov 15, 2010
I bought the Caden Convertible
1-800-933-7115
This is the number for replacement parts for all furniture at JC Penney. You can order new hardware for your Caden Convertible Rockland crib.
10/4/2010 12:10:20 PM •
JCPenney...
•
Answered
on Oct 04, 2010
Not finding what you are looking for?