Does the power light come on? If not, check the power cord and power outlet on the wall. Maybe plug in a table lamp to the wall power outlet to make sure the outlet is working. If the power light is on, check the Mute button on your JBL remote control. Also check the Mute button on your TV if sound and picture go through the TV first.
We had a Harman Kardon soundbar (model SB30) made by the same company as your JBL. It worked great for a few months. Then there were a couple of funny high-pitched sounds that stopped when we turned the soundbar off and back on. Then a day or two later we truned on the soundbar and it was completely dead - no sound at all. Harmon/JBL replaced the soundbar under warranty with a refurbished one which lasted about two weeks and dies the same as the first one. Finally, they replaced the second one with a higher model (the SB35) which is still working, although it occasionally makes a rapid clicking noise for a moment here & there.
It is very dependent on your vehicle and whether you are using the built-in amp of the head unit or a separate amp. Ideally, I would recommend a good 6.5" component set.
Some TVs have headphone output. It is 6.3mm jack or 3.5mm jack. Often located on the back of the TV if it is a LED ord LCD TV.
You probably need an audio cable that has jack in one end and two RCA konnectors in the other.
If it isn't sound you're looking for, but picture, and your TV only have SCART or component image input, you need equipment with SCART output or component output. Some SCART plugs do have separated audio and component outputs.
www.jbl.com > Wireless > Portable Bluetooth Speakers
JBL
Rating: 4.7 - 35 reviews
Splashproof JBL Xtreme Bluetooth speaker with explosive sound, 15 hours playtime, dual USB port can link multiple speakers and ... Product Specs & Manuals.
I have no experience of wireless speakers but I think you should contact the seller, if the unit is still under warranty or perhaps the support section of the manufacturer's website.
Certainly do read the instrucion manual.
I am guessing but either the wireless signal is being lost (depends on the function of the blue light) or the subwoofer is malfunctioning after a few minutes and the built-in thermal or overload protection is switching it off. The thump sound could be it trying to switch on again and finding the fault is still present.
Just my thoughts...
Yes, follow this sequence:
1. Turn the device on
2. Press the call (phone icon) and the volume up (+) button at the same time and keep them pressed. After a few seconds the speaker will shut down.
3. Release the buttons.
4. Turn the speaker back on. It will automatically enter into search mode... And there you are, memory wiped up.
Good luck.
You need to calculate the amount of amps being driven through that fuse + the amount you need to feed the amplifier.
In my Volvo S40 and V70 I had no problems driving an amplifier of the rear power connector, but on my Honda S2000 however I had to create a different connection all the way to the battery line for a smaller amp (connection as in cables, condensers/filters and fuses).
the change from red to green is simply the auto sense of the input signal happening . have you ck the simple things first , like the volume control (im sure YOu didn't touch it , but maybe someone else did) , did the input jack sustain some internal dammge that might not be seen from the outside ? how did you ck the speaker ? did you sub it out with another known working one (doesn't have to be same size to try it) ???
Oct 26, 2015 - My JBL Flip 2 is having some problems I turn it on and it all the lightsblink for a light ... I suspect it has to do with the bluetooth connection? .... Then, all of the sudden on the 2nd day, it will only stay on for about 2-3 minutes and ...
? 3:00
https://www.youtube.com/watch?v=9Nw8aXC3Gdk
Dec 22, 2012 - Uploaded by Kempton Lam
My JBL Flip 2 is having some problems I turn it on and it all the lights blink for a light then ... I suspect it has to do with the bluetooth connection?
www.jbl.com > Wireless > Portable Bluetooth Speakers
JBL
Rating: 3.5 - 270 reviews
Top Selling JBL Flip 2 rechargeable portable speaker features superior sound, ... JBL Flip 2 the wireless, portable, rechargeable battery powered speaker that is an all-terrain party you can carry in the palm of ...... Airforce1, do you mean registering the device with JBL or pairing? .... I have no sound or light from my speake
When I try to connect the pc through Bluetooth to the above wireless speaker ... 2) What is the model of the JBL Charge Bluetooth speaker? ..... I am already able to play music from my iPhone 5 on this speaker via Bluetooth with no problems.
Dell
Sep 22, 2013 - 16 posts - 11 authors
23 Replies; 16 Subscribers; Postedover 2 years ago ... I'm trying to connect my JBL Charge Speaker bluetooth with my Dell Studio 15 laptop to listen .... I am having the same problem, did you find a fix for this? ... not support audio output, then you need to add a Bluetooth adapter which includes a CD driver.
www.jbl.com > Wireless > Portable Bluetooth Speakers
JBL
Rating: 4.3 - 110 reviews
Most popular JBL Charge 2 wireless portable speaker can charge any devices via USB... You can easily connect Charge 2 to any Bluetooth-enabled device by giving the portable's ..... Charge with proper charger or a USB port form computer.
Sounds like it could either be the crossover circuit or a distorted speaker cone. The cone is the easy one to check. You need to check that it moves freely at all points. It sounds like you have partly done this, but you just need to make certain you went all the way around the cone checking for free movement.
However I don't think it is the cone, because of the slow way it acts up. That could be the crossover circuit. If you have a look at it and see either an IC or transistor looking parts, then I would have thought it would be one of them acting up - presumably getting hot!
If you can have the speaker outputting sound, with access to the crossover, you could spray these parts (one at a time if there is more that one) with Servisol Freezer spray. You simply wait till the fault develop then spray the suspect part. If it returns to normal you have located the faulty part. If nothing happens, wait till the coolant wears off then try the next suspect.
Places like Maplin stock the Freezer spray.
