Javelin Systems Inc Popular Questions, Answers, Tips & Manuals

Buddy, these drivers are not launched yet.
Contact:

Javelin Systems Asia Pacific
Building 11,
56 Buffalo Road
Gladesville
NSW 2111
Australia
Phone. +61 2 8878 6666
Facsimile. +61 2 9807 9099
Email. [email protected]


Why dont u email them and ask them the launch date of the drivers on the net.

Well you could remove the HDD from the POS, install it into a computer with a CD, remove the HDD currently in the computer, set the POS drive to the Primay Master, install Your OS and any other software (be carefull as to NOT format the POS drive, It may contain important files), remove the drive, reinstall it in the POS system, Put back the drive you removed from the computer.

Card readers build up magnrtic particles from the cards they read . u might try cleaning it with a blank card that has a rough surface/ladened with alcohol, or a very small q-tip ladened with alcohol to remove the dirt and magnetic residue. too much built up residue can cause, loss of reading ability, and lost sensitivity between the card and the reader.

i had a hard tim loading my javelin but i had to use a laptop adapter that makes a laptop hard drive commect to a standerd pc ide cable and loaded it that way i just copyed the cd to the harddrive and put the harddrive back in the javelin and run setup off the hard drive

i will sell you my javelin pos it's a viper

ebay

There is a Win98 shutdown patch from Microsoft. But Microsoft stopped supporting Win98.
You can find the patch on this website:
http://freepctech.com/pc/002/files007.shtml
It is the 3rd item listed.

You may have to copy and paste the link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

hi there

click here for details

don't forget to rate it

i have a working javelin viper i will sell

have you tried installing the camera's drivers?

use a usb cd drive and set your computer bios to boot from the cd

There are Components available on net. You have to just download them, install on your system, and use it in your application. I doing same using delphi.

For java zip/compresson component click here.

There are many links for different application. Select one which you want and enjoy......:)

Thanks
Iqbal

YEAH SURE,, its quite easy actually

Go to the manufacture's web site if your main board or network card
in the support link, search your model device and download the driver for it..

of you can just pop any main board cd in for you and it should use the default driver as most is standered LET ME KONOW IF OU HAVE TROUBLE LOCATING IT ON THE PAGE OR IF IT AINT AVIABLE

http://www.pointofsuccess.com/demodownload.htm this may help u decide its only a demo but if u like then you can buy full version.

this is a free pos program  ftp://www.gopositive.com/pub/positive/Alpha/PFW4h.exe

quickstart guide  ftp://ftp.gopositive.com/pub/pdf/PFW%20Quick%20Start%20Guide.pdf

just copy and past the links to ur browser

Check this out:

http://www.sharewareconnection.com/titles/reader13.htm

is the hard drive set to master or slave?

Check the bios and see if it is listed.

What operating system are you using?

The Viper is network-ready with an integrated 10/100BaseT controller. why would you need one?