I bought what I think
Jasco Products does an excellent job in providing on-line manuals for most all their products. See this manual at -
http://www.jascoproducts.com/support/manual-downloads/applications/DocumentLibraryManager/upload/51207-Manual-Eng.pdf
I want to strip the concrete floor that I use
1
Make sure that the surface of the concrete is cleaned thoroughly. Remove stubborn dirt or stains with a mixture of one part degreasing cleanser and two parts water. Rinse the concrete well and wait 48 hours before continuing.
2
Use a large paintbrush or a long-handled paint roller fitted with a fine-nap roll to coat the entire concrete surface in a thick layer of soy-based or other environmentally-safe chemical stripper. Allow the stripper to eat away at the sealant for 10 minutes, scrape up the peeling sealant with a paint scraper or putty knife. Clean up all of the debris.
3
Rinse concrete to remove all of the stripper. Let the concrete dry 48 hours. Apply the new sealant or the finish of your choice .
Ge sunsmart
Reset timer using manual
You found recommended answer with link to manual with reset instructions. Scroll toward bottom 1/3 of page on following link
http://waterheatertimer.org/GE-timers-and-manuals.html
Another option is buy identical timer from Home Depot and return defect in new package
This timer has 1 year limited warranty thru Jasco
Fixya provides accurate information, but if timer expert does not answer question in quick same-day response, then fixya sends recommended answer which may or may not directly answer question, but might give useful resources. Look at date on each answer.
Sorry I was unavailable to answer your question quickly.
Please add a comment. I am the timer expert at fixya and deal with most 60 cycle US timers, residential and commercial, all brands. And many 50 cycle Europe and Asian timers, including many of the newly marketed 50-60 cycle timers being custom made to order for any specific worldwide market, including wiring diagrams and programming.
Gene If you need further help, I’m available over the phone at
https://www.6ya.com/expert/gene_9f0ef4df2f9897e7
8/17/2013 6:54:37 PM •
Jasco 15079...
•
Answered
on Aug 17, 2013
•
597 views
Ge codes tv
0004 0009 0044 0135 0049 0051 0189 0053 0147 0039 0130 0227 0233 0250
0252 0254 0257 0265 0266 0310 0325 0456 0040 0041 0042 0021 0023 0024 0179 0045
0025 0027 0030 0032 0034 0035 0037. these are the codes to check. If you wish to get more, check the sites linked here.
http://electrohelponline.blogspot.com/ http://electronicshelponline.blogspot.com/ Pull up previous posts there, either by its
left side bar, or view it in
Mosaic / Timeslide option.
7/30/2013 8:09:13 AM •
Jasco 24911...
•
Answered
on Jul 30, 2013
•
31 views
Not finding what you are looking for?