Janome Televison & Video - Page 9 - Popular Questions, Answers, Tips & Manuals
Turning sound back on magic chef 990st
It seems like you're referring to a Magic Chef model 990ST, possibly a kitchen appliance. If you're trying to restore sound or resolve sound-related issues on a Magic Chef appliance, here are some general steps you can take:
- Check Volume Settings:
- If the appliance has volume controls, knobs, or buttons, make sure they are set to an appropriate level.
- Look for any mute buttons and ensure they are not activated.
- Refer to the User Manual:
- Check the user manual that came with the appliance. It often contains troubleshooting tips and information about common issues.
- Power Cycle:
- Turn off the appliance completely and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on. This can sometimes resolve temporary glitches.
- Check Connections:
- Ensure that all cables and connections related to the sound are secure. Loose or disconnected cables can result in audio issues.
- Test with Different Inputs:
- If your appliance has multiple input sources (e.g., different burners on a stove), try using a different input to see if the sound issue persists.
- Contact Magic Chef Support:
- If the above steps do not resolve the issue, consider reaching out to Magic Chef's customer support. They may provide specific guidance or recommend further troubleshooting steps.
- Professional Assistance:
- If the appliance is under warranty or if you're not comfortable troubleshooting it yourself, consider contacting a professional technician for assistance.
Remember that the steps may vary depending on the specific type of Magic Chef appliance you're dealing with. If it's a kitchen appliance like a stove, oven, or microwave, the user manual should provide guidance on sound-related issues.
If you provide more details about the specific appliance and the sound-related problem you're experiencing, I may be able to offer more targeted advice.
I bought a 58" Smart TV with you guys, but WiFi is not connecting.
For Wi-Fi, go to your TV's Network Settings. Select the option to set up a new wireless connection.
Select your Wi-Fi network and input the password.
For wired connections, connect an ethernet cable to the port on your TV from your router. Go to Network Settings to enable wired internet connection.
Quantum dvd display message " do not watch dvd" in the middle of movie
If your Quantum DVD player is displaying a message saying "Do not watch DVD" in the middle of a movie, it could be due to a variety of reasons. Here are some steps you can take to troubleshoot and resolve the issue:
- Check the DVD for Damage:
- Inspect the DVD for scratches, smudges, or other damage. A damaged DVD can sometimes trigger error messages.
- Clean the DVD:
- Clean the surface of the DVD using a soft, lint-free cloth. Wipe gently from the center of the disc toward the outer edge.
- Try Another DVD:
- Test the DVD player with a different DVD to see if the issue persists. This can help determine whether the problem is with the specific disc or the DVD player.
- Firmware Update:
- Check if there is a firmware update available for your Quantum DVD player. Manufacturers often release updates to address bugs and improve compatibility.
- Check for Region Code Issues:
- Ensure that the DVD is compatible with the region code of your DVD player. If the region codes do not match, it may trigger error messages.
- Reset the DVD Player:
- Turn off the DVD player, unplug it from the power source, and wait for a few minutes. Plug it back in and turn it on. This can sometimes resolve temporary issues.
- Inspect for Foreign Objects:
- Open the DVD player tray and check for any foreign objects (dust, debris, etc.) that may be interfering with the playback. Clean the interior of the DVD player if needed.
- Contact Quantum Support:
- If the issue persists, it's advisable to contact Quantum's customer support. They may provide specific instructions or recommend further troubleshooting steps based on the model of your DVD player.
Remember to consult your DVD player's user manual for model-specific troubleshooting steps and information. If the problem persists and the DVD player is under warranty, consider seeking professional assistance or returning it to the manufacturer for inspection and repair.
I got a un60es610fxza the power button flashes and it has a popping noise when trying to turn it on
The symptoms you've described, including a flashing power button and a popping noise when trying to turn on the TV, indicate potential issues with the power supply or other internal components. Here are some steps you can take to troubleshoot the problem:
- Unplug and Wait: Disconnect the TV from the power source and wait for about 10-15 minutes. Then, plug it back in and attempt to turn it on. This allows the TV to reset and can sometimes resolve temporary issues.
- Check Power Supply: Verify that the power supply to the TV is stable. Ensure the power outlet is functioning correctly, and try plugging the TV into a different outlet. If possible, test the TV with a different power cable.
- Inspect for Physical Damage: Examine the TV for any visible signs of physical damage, such as burnt components or damaged cables. If you notice any, it may indicate a hardware problem that requires professional repair.
- Perform a Hard Reset: Some TVs have a reset button or a specific procedure for a hard reset. Refer to the TV's manual or contact the manufacturer for instructions on how to perform a hard reset.
- Check for Error Codes: Look for any error codes or diagnostic indicators on the TV. Refer to the user manual or contact the manufacturer's support for information on interpreting error codes.
- Professional Inspection: If the issue persists, it's advisable to seek professional help. A certified technician can diagnose and repair internal components, such as the power supply or main board, if necessary.
- Contact Manufacturer Support: Reach out to the manufacturer's customer support for guidance. They may be able to provide specific troubleshooting steps based on the symptoms you've described.
Given the popping noise, it's important to exercise caution and avoid attempting repairs if you are not familiar with electronics. Internal components of a TV can carry high voltages, and improper handling may lead to injury or further damage.
If the TV is still under warranty, consider contacting the manufacturer for warranty support or instructions on the next steps. If not, seeking professional assistance is recommended for a thorough diagnosis and repair.
My replacement rc-518m remote control is stuck in TV mode how do I get back to a/v
It may be necessary to take the remote apart and clean the contacts with rubbing alcohol and a tissue on the board that is inside. If that doesn't fix it, a replacement is necessary at Ebay.com https://www.ebay.com/itm/394877786274?itmmeta=01HT47X6X7WE749Y2CMG3NX54S&hash=item5bf08cd8a2:g:7pQAAOSwn7BlAn8h&itmprp=enc%3AAQAJAAAA4OMK5%2BdFWZwJQhIS5nEQ3eO7C2zq5QRICeu%2BbPKwqrfkc8con3byi0%2BbabcDYrBTOEyKclvkbzHrOJ1lVMfwduYTPcx0fAcW5XmaZ3ZRWS1%2FnVxMUIwno%2BPNUVuNqN%2FCSDJJ3gG2hQ%2BbGGyfUiO2ppgtjsvtiihnrClntKtSssM8RikHgpG8y9SjAz6z0V0GPkVJf6gypymGRdzz4HfuNn%2BkiMmAXp2NHVWpP6xfbghej%2B1MkOgqhJxV4V1B%2Bp8wVx%2BKV36M%2FVEdzoejZajCMt9ApRe1beW4a0rCXTdGZRuV%7Ctkp%3ABFBM2u70h9Fj
I'm not receiving local channels - NBC, CBS, FOX, ABC..my model was manufactured in 2009. Do I need a newer model
The question is missing three sets of crucial details. The make and model of the television and make and model of the equipment that is supplying your television signal (set top box), plus the company that is supplying your service.
If you were getting service since 2009, you should still be getting it, UNLESS you had an old analogue system and the company supplying you changed to digital. They will have told you this many times and given you a deal to upgrade. We had that with Rogers Canada, they charged us more money for less channels so we left them and went to Bell Canada.
In closing, those channels have to part of a basic package and they must also be free with an over the air system often referred to as a 'Rabbit Ears' antenna.
If you click Comment under here, I will come back and help you work this all out.
..
Not finding what you are looking for?
