Janome Televison & Video - Popular Questions, Answers, Tips & Manuals

Try installing a brand new needle. If that doesn't work, it could possibly be a needle/hook timing issue. You should probably take it for service.


Janome NH Jem... | 576 views | 1 helpful votes

when you put the bobbin back in the case , pull a bit of thread out and under the spring tension
turn the machine until the needle pulls up the bobbin thread and place both threads out behind the sewing foot.

Janome NH Jem... | 593 views | 0 helpful votes

it should go on until you hear it click
make sure that the needle is in the fully up position as there is a special position for the bobbin to click onto.

Janome NH Jem... | 321 views | 0 helpful votes

There is a screw that is pretty hard to get to. I suggest using a Philips screwdriver that is magnetized. When you remove the large wheel on the right side of the cover, look inside and where you removed the wheel from. There is one last screw there which has to be removed.
Best wishes!

I’m happy to help further over the phone at https://www.6ya.com/expert/mark_7bbaa7a1174e0903

Janome Jem Gold... | 422 views | 0 helpful votes

Your TV is "going off" because the power supply is failing.

Televison &... | 140 views | 1 helpful votes

Unless you fix it yourself, likely not. There are probably bad capacitors on the power supply board. I assume that the warranty is long since expired...

Televison &... | 281 views | 1 helpful votes

fixya is not dstv notify them

Televison &... | 116 views | 0 helpful votes

There are several power adapters for the Durabrand PDV-709 portable DVD player. Amazon has two that I found quickly https://www.amazon.com/MyVolts-adaptor-compatible-Durabrand-PDV-709/dp/B00GQV4XF0 and https://www.amazon.com/KHOI1971-DURABRAND-DPX3290L-Portable-adapter/dp/B003KWDD7W . These are not Durabrand labeled but they are compatible with your DVD player.

I hope this helps.

Cindy Wells

Televison &... | 290 views | 1 helpful votes


Televison &... | 289 views | 1 helpful votes

The power board controls the back lights. The issue appears to be related to that. However it could be the LED back lights are having an intermittent failure, if that is the case, replacing the power board wont help. Troubleshooting the LEDS when they are intermittent is a problem, you could replace the LED strips and see if that helps and if it does not then you replace the power board https://www.shopjimmy.com/vizio-0500-0605-1140-power-supply-for-d65-e0.htm

Televison &... | 198 views | 1 helpful votes

No polarity. It's AC, not DC. The capacitor is a "non-polar" type.

Televison &... | 309 views | 1 helpful votes

Hello Sherry, indicate brand and model of the DVD and converter box, to find the best possible answer
I await your comment
Greetings Franco Dosil

Hola Sherry, indique marca y modelo del DVD y de caja convertidora, para poder encontrar la mejor respuesta posible
Espero su comentario
Saludos Franco Dosil

Televison &... | 36 views | 0 helpful votes

Which travel channels do you watch for the most of time? I refused from cable and analogue TV channels, happily Youtube offers very decent content today. Here's a great list of top travel channels on YouTube https://travelsites.com/travel-channel , enjoy.

Televison &... | 63 views | 0 helpful votes

Use code search on your URC to find something that works. If a search through all codes stored in the URC fails, try a different one.

Televison &... | 46 views | 0 helpful votes

Hello Jennifer, I must understand that you speak of a video projector, to locate where the fan is, you would have to tell me, make and model, of your projector
Apart from cleaning the fan, you should also clean the dust filter, which is usually removed with a screw
Discuss what results you had with cleaning the filter and also comment on the make and model of the projector
I hope you can solve the problem
Greetings Franco Dosil

Hola Jennifer, debo entender que hablas de un proyector de v?deo, para ubicarte donde esta el ventilador, tendr?as que decirme, marca y modelo, de tu proyector
aparte de limpiar el ventilador, deber?as tambi?n, limpiar el filtro para el polvo, que por lo general, se retira con un tornillo
Comenta que resultados tuviste con la limpieza del filtro y tambi?n comenta marca y modelo del proyector
espero que puedas solucionar el problema
Saludos Franco Dosil

Televison &... | 49 views | 1 helpful votes

Not finding what you are looking for?
Janome Logo

5 questions posted

Ask a Question

Usually answered in minutes!

Top Janome Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76046 Answers

Cindy Wells

Level 3 Expert

5869 Answers


Level 3 Expert

84625 Answers

Are you a Janome Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides