Janome Logo

Janome Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 142 Products
  • 6K Answers

The Janome 6019QC has the reverse stitch button to the right of the threading path below the thread tension dial. The thread tension dial is under the top cover but the two points help triangulate the button. The reverse stitch button is shown as item 27 on the first illustration of the parts of the sewing machine in the manual (page 2 of the manual, page 4 of the PDF). Janome has the manual on the retired machine page: https://www.janome.com/support/retired-machine-manuals/ . The manual is in the right-hand column under the Other Machines heading. The current link to the manual is https://www.janome.com/siteassets/support/manuals/retired/other-models/inst-book-6019qc.pdf .

I hope this helps.

Cindy Wells

Janome Sewing... | Answered Yesterday

Go to Yahoo or Google and type the name, model, and serial number and manual. You should get a list and you can copy it and print.

Janome Sewing... | Answered on Mar 17, 2019

sadly I can not but try it either way and see if it works properly , if not reverse

Janome Memory... | Answered on Mar 12, 2019

Janome has the manual for the Memory Craft 7500 on their retired machines support page: https://www.janome.com/support/retired-machine-manuals/ . Look under the Computer Models in the left-hand column. The Memory Craft 7500 is near the bottom of the list. The current link to the manual is https://www.janome.com/siteassets/support/manuals/retired/computer/inst-book-mc7500-en.pdf . You can also find the manual at ManualsLib: https://www.manualslib.com/manual/866820/Janome-Memory-Craft-7500.html . Some sewing machine parts shops online will sell you a PDF or printed copy of the manual. (One shop with the manual is https://www.sewingpartsonline.com/instruction-manual-janome-mc7500.aspx? .)

I hope this helps.

Cindy Wells

Janome Sewing... | Answered on Mar 11, 2019

Does the 234d Finesse overlocker Have a Roller hem Plate or is it just a Setting I Need to do on it..?

Janome 2049LX... | Answered on Mar 08, 2019

Here's Janome LO error;

LO: Replace the foot controller.
  1. Check for a tight or stuck clutch by the hand wheel.
  2. The machine may be jammed. Remove the timing belt to locate whether the bind is on the upper shaft or lower shaft. If it is the upper shaft, there may be thread caught in the take-up lever or crank pin. If the lower shaft is binding, check hook clearance, hook backlash. Check the lower shaft rear bushing for any black 'gunk'. If there is, replace the lower shaft and rear bushing.
  3. Clean the sensor on the DC motor and check if the shield plate on the motor is not loose or hitting the sensor. If either the sensor or shield plate is damaged, replace the motor.
  4. Check the upper shaft sensor. Make sure the shield plate is going perfectly thru the middle of the sensor. Replace the sensor and/or shield plate if damaged.
  5. If you still get the error, replace the DC Motor or upper shaft sensor (in this order).
My first thought is if you're running nearly non-stop for an hour the motor is overheating. Not sure what the maintenance schedule is for this machine <?>. May need a good cleaning/lube. Then foot pedal, then other.

Janome 6260QC... | Answered on Mar 07, 2019

Make certain that your fabric is the same level and thickness all over and that there are no folds or creases anywhere on top or bottom.
If this continues you should have a technician look it over.

Janome Sewing... | Answered on Mar 06, 2019

Hi you should be able to do this in the edit screen if you hoop size can fit both designs.

Janome Memory... | Answered on Mar 04, 2019

See "Z". Apparently there are two spaces with Z.

Janome Sewing... | Answered on Mar 04, 2019

Resort to the troubleshooting in the manufacturer's instructions, if nothing there try reseting them by hand, flip the machine up and apply oil to the dog mechanism don't put your fingers near them as they may snap back, but use a small screwdriver to give them a tap and see if they move...hope this helps...good luck...

Janome Sewing... | Answered on Mar 03, 2019

Does it have another plate for rolled hems?

Janome MyLock... | Answered on Mar 01, 2019

first, check out the needle, you may need to insert a new one, then the tension and thread for the material you are sewing and make sure that the thread is not too old and that the same thread is in the bobbin and the thread on top. :-)

Janome Sewing... | Answered on Feb 26, 2019

Are you using old thread? Is the needle threaded correctly, is the thread the same in the bobbin as the top. Are the thread and needle the correct size for the material? Is the stitch length and tension correct for the material? :-)

Janome Sewing... | Answered on Feb 26, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Janome Experts

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

R.A. Ellis
R.A. Ellis

Level 3 Expert

12730 Answers

Tom Chichester

Level 3 Expert

50961 Answers

Are you a Janome Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides