Jamo i300 speakers are dead.
There is peobably a fuse located on the back. Your speaekers are probably okay. If anything fried inside, it is probably the output transistors.
Subwhoofer
According to the pamphlet I received with system you plug the line out of unit to the left plug on subwoofer.
Jamo Sub300. No power. No lights
Well it would void the warrantee, but you can take the back panel off and the power supply will only have two leads (3 if grounded) in from the plug, and out to the crossover. It sounds as if you are correct that the power supply is bad.
Charles
1/12/2009 7:27:26 PM •
Jamo SUB300BA...
•
Answered
on Jan 12, 2009
•
2,120 views
Manual
Try the following link.
http://www.jamo.com/Default.aspx?ID=5981
JAMO SUB 650
hi
since it is a powered speaker, probably it just needs a sound signal which you can get from the headphone socket. please double check with someone else.
6/27/2008 7:12:45 PM •
Jamo D 4SUB...
•
Answered
on Jun 27, 2008
•
685 views
Jamo subwoofer issues
hai iam hans i had also a problem with the sub
turned out jamo denmark didnt had the spare parts to fix it?
can u believe that
so i wait 6 weeks and after 100 phone calls to denmark and my local dealer they deside to take the part out of another sub ?.
but i really had to make a a lot of effort to achive this
but for the price the jamo set is exellent
a shame about the service .
USB problem
It seems the DVD player is not recognizing 4GB flash disk. I have checked and I can't see that there is a firmware update for this model though I can see one for the DMR 50. Try contacting
Jamo support
If you have another usb lead or a lead that can collect two usb sockets to the flash disk you may find this works as there is more 5 volts power available from two sockets.
We depend on you rating solutions - I hope this is useful.
Jamo DVR-50 Problem
had same problem told power supply unit is u/s £153 all in to fix it , gonna get new player , other probs telephone Telefringe 01373 462598. hope this helps someone.
4/4/2008 1:01:31 PM •
Jamo DVR-50...
•
Answered
on Apr 04, 2008
•
810 views
Jamo DMR60- sound doesn't match dvd
I have the same problem. I have been in contact with Jamo Denmakr and Norway. They are aware of the problem. There are two issues/answers:
1 If the DVD your're playing has scratches reading error accumulate and then audio sync problems occur. (My meaning is lo quality DVD drive). You might overcome this by reburning the divx file to a new disc to avoid read errors.
2 The DVD drive itself is defective and should be replaced. Warranty should cover this of course. I do receive my DMR-61 this week after DVD drive change. I hope this will fix it...but I don't believe so. Crossing my fingers.
Henning
I have no amp for jamo 1060 sub
Dual Voice-Coil
The unique Dual Voice-Coil design allows both left and right channel
sound from just one speaker. Simply hook up both the left and the right
channels to the special terminals on the speaker. Hook up one channel
only, if the speaker is to be used in a conventional stereo set-up.
I found this on jamo site hope that will help you
5/26/2008 12:14:44 PM •
Jamo 1060 SW...
•
Answered
on May 26, 2008
•
509 views
Speakers
Any make should do, just be sure the ohms match or else you run the risk of damaging the speakers if they are under rated, or the reciever if they are overrated. Usually it can range from 4 to 8 ohms, which is represented by a horseshoe shaped symbol.
Just got a jamo A3SUB.3
check all your plus sign and minus sign that connected to the receiver , if connected wrong you will not have any bass,because it going backward. Good luck!! any quest email me
[email protected]
1/30/2008 10:36:29 AM •
Jamo D 4SUB...
•
Answered
on Jan 30, 2008
•
1,349 views
Jamo 250
hi, there must be this LINE IN socket (ur so called Hole), then on the onkyo, there must be this sub-line out socket, plug one end of the RC socket to the sub out of onkyo , and other to the line in of the sub, its all to do wirth its appropriate inputs and outputs,let me know
5/11/2011 3:54:02 PM •
Jamo D 4SUB...
•
Answered
on May 11, 2011
•
570 views
Dvr 50
Hi I have jamo Dvr50 system and it has been frozen since yesterday. I have power down few times but nothing is happening. It comes on and panel lights up but that is all.
4/15/2008 3:33:48 PM •
Jamo DVR-50...
•
Answered
on Apr 15, 2008
•
536 views
Door won't open
Usually, the gears either become misaligned, or they will break on you - since they are plastic, this is a common issue. There really isn't much you can do. Even opening it up might not do much for you, as it's very hard to get the gears back into place, or to see what is causing the jam in the first place. If you take it to a service center, they shouldn't charge you much if the gears are out of whack. But if something is broken inside, that's a different story. You'll need to find out what caused the error in the first place.
-
TWEAK A/V LAB
Region Problem
To change the region perform the following actions:
Power on Player /Open/ (/eject/), then on remote /stop/ then /9735/ and then go to /setup/ and choose no region.
It should know play all disks.
Please update the question & let us know if the information given was useful to you - Good Luck!
Not finding what you are looking for?