JAKKS Pacific Recent Questions, Troubleshooting Help & Support

You directed this question at me, but unfortunately I am unable to provide you with a real solution at this time.FixYa has discontinued direct questions, so if you would care to repost your question, the repost will be visible to all members of the FixYa community. Hopefully one of them will be able to provide you with a real solution.Thank you for using FixYa.

Hi

After you power on the game, the screen will prompt you to calibrate the gun before playing. Following the games on-screen instructions can sometimes be a challenge, though taking certain measures will improve your chances of successfully calibrating your controller with the Plug 'n Play sensor. Place the sensor near the center of the television, as close to the top or bottom of the screen as possible. You may need a platform to rest the sensor on -- the closer to the screen, the better the results.Stand or sit approximately 3 to 8 feet away from the television screen for best results. Try to situate yourself as level with the screen as possible. Shoot the target at the top left portion of the screen first, and then shoot the target at the bottom right portion of the screen. Remain in that exact position to get the most accurate shooting results. To prevent the need for additional calibrations, mark your location to make it easy to return to the correct spot.

Please get back to us if you have further query or else please accept the solution.

unplug all rca cables from your eyeclops, then try all three colors one at a time, into the yellow colored hole on the side of your eyeclops, until you get a picture, and you have to have the dvd player on and playing a dvd, otherwise the light won't come on your projector, then plug in the audio sources, the yellow and white. When I got my eyeclops mini projector, it wouldn't work at all when I plugged the yellow rca cable in the yellow hole on the side of the eyeclops, the red into the red, and the white into white. Only when I placed the red rca cable into the yellow hole on the eyeclops, the yellow into the red hole, and the white rca cable into the white hole did it finally work. That was for my dvd player. With the video game function, I plugged each color Rca cable into their same colored holes on the eyeclops and it worked fine, but again, you have to have your device, whether it be a dvd player or game system on and running before your eyeclops led lights will turn on. Not sure I had to switch colors when I played my dvd player, but that's how it works on my mini projector, anyways.

Hi neil_t569,

There is a reset button on the back of the watch. Reset the unit and the USB port will work.

Hope it helps.

Thank you for using FixYa.

get ur USB and plug it up to the computer and and then plug it up to ur watch, and the computer has to be on, so play on the computer for a while and then it should be charged if not then u should return it or buy a new one.

If all else fails, read the instructions!! First would have been better.

how did you hook up your connections?