Jacuzzi Pool & Spa - Recent Questions, Troubleshooting & Support


You have a: Single Stage Jet Pump, c/w Cast Iron Construction, Thermoplastic Impeller, .... coupled to a :
1/2 HP, 115/230 Volt Motor with a 1" x 1-1/4" Discharge x Suction. If you can't find a Jacuzzi, you can always replace it with one of like specs. Check a local plumbing supply dealer or online ...
https://www.grainger.com/category/well-pumps/pumps/ecatalog/N-hve This may also help:

Jacuzzi Pool &... | Answered on Jul 11, 2018


probably the element shorted out and caused the problem
get in an electrician to check the wiring and circuits

Jacuzzi Pool &... | Answered on Mar 24, 2018


bad motor replace whole pump if grinding its over heating and distorting plastic and seals

Jacuzzi Pool &... | Answered on Jan 20, 2018


possible recirculation pump over heating and turning on and off

Jacuzzi Pool &... | Answered on Jan 20, 2018


LF low flow check recirculation pump and pressure switch

Jacuzzi Pool &... | Answered on Jan 20, 2018


where it stops leaking is where leak is look around fittings

Jacuzzi Pool &... | Answered on Jan 20, 2018


check recirculation pump the heater element and pressure switch

Jacuzzi Pool &... | Answered on Nov 26, 2017


wrong union wrong threads

Jacuzzi MAGNUM... | Answered on Nov 26, 2017


you do not want to replace the motor only, the pump is handled as a unit... there are seal issues, etc.

Jacuzzi Magnum... | Answered on Nov 09, 2017


check to see if recirculation pump is working if ok check pressure switch if ok check heater element and temp sensor

Jacuzzi Premium... | Answered on Oct 24, 2017

Not finding what you are looking for?
Jacuzzi Logo

329 questions posted

Ask a Question

Usually answered in minutes!

Top Jacuzzi Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1389 Answers

Mike

Level 3 Expert

4357 Answers

john h

Level 3 Expert

19466 Answers

Are you a Jacuzzi Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...