Jacuzzi Garden - Recent Questions, Troubleshooting & Support


Need to know what buttons your topside control has... depending on the model, some have a mode button which you press and release and then immediately press the temp up or down, to select SL for sleep (no heat), ST for standard (heat as needed) or EC for Economy (only heat during filtration). If the mode button is not present, and you have a single temp button and light button, try pressing and releasing temp and then immediately pressing light button, repeat until choice appears, then wait, it will hold last displayed mode.

Jacuzzi Balboa... | Answered on Jul 23, 2018


turn system off let water settle get pheno red or leak detector squirt carefully by each spa jet if color goes to that area it could be leak i need more info was this spa winterized if so take sides off look for the water you might have to dig the insulation away to acually find leak usually it is plastic couplers

Jacuzzi Balboa... | Answered on Oct 19, 2015


press temp button and then the light button in sequence.

Jacuzzi Balboa... | Answered on Aug 01, 2015


here's a site where I found tons of jacuzzi parts and accessories.
http://calwesthot1.reachlocal.net/AdvancedSearch.aspx
under select catagory scroll about half way down to jacuzzi pumps and hit search.
If you find what you need can I borrow the jacuzzi .. lol

Jacuzzi MAGNUM... | Answered on Jan 09, 2015


Replace your starting compassator or starter relay.

Jacuzzi Garden | Answered on Nov 04, 2013


If you have not already done so, use teflon tape on the threads for the outlet port. This may solve your problem. Good luck!

Jacuzzi MAGNUM... | Answered on Oct 16, 2013


If the system is the Jacuzzi 52221-05 system mentioned in the subject header, there could be a stuck relay causing the problem and you might need to get a spa technician out to assist you in repairing the problem. However...

If it is a Great Lakes system as mentioned in your message body, then there could be a programming issue allowing the filter cycle to run continuously. Provide a model number off of the Balboa control. Then we can provide you an instruction manual or reference card to assist you in resolving this problem. you can also search our online manuals at our website. You can find them online at:

BALBOA WATER GROUP INSTRUCTION MANUALS

Jacuzzi Balboa... | Answered on Aug 04, 2013


No preventative maintenance is necessary. However, a happy pump always has water above it and should not pump sand. If the water level in the well is below the pump/motor they will overheat. If this is a problem your local pump company can install a module to protect your pump from this type of event.

Please rate this answer.

Jacuzzi Brothers... | Answered on Jul 08, 2013


Either the spa is incorrectly wired or one of the fuses is blown in the spa pack. Typically this is due to your electrician wiring the spa incorrectly and blowing the fuse on accident.

Jacuzzi Balboa... | Answered on May 09, 2013

Not finding what you are looking for?
Jacuzzi Logo

76 questions posted

Ask a Question

Usually answered in minutes!

Top Jacuzzi Garden Experts

john h

Level 3 Expert

19466 Answers

Bath and Spa Parts...
Bath and Spa Parts...

Level 2 Expert

47 Answers

Jay Finke
Jay Finke

Level 3 Expert

1389 Answers

Are you a Jacuzzi Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...