Jacuzzi Logo

Jacuzzi Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 376 Products
  • 2K Answers
  • 311K Views

if you had any kind of power failure it will go to default ---recheck heater settings and filter settings

Jacuzzi Pool &... | Answered on Aug 10, 2016


use a local dealer and buy both . with understanding you can return the wrong one .unused of course

Jacuzzi Pool &... | Answered on Jul 06, 2016


the voltage required is stamped on the plate on the electric motors
it will read
voltage
phase
current( watts)
duty cycle that plate tells you what the motor needs to run

Jacuzzi Home | Answered on Jun 23, 2016


the motor protection device is sensing to many amps. could be a flow restriction or the pump motor bearings are going bad.

Jacuzzi Home | Answered on May 18, 2016


in from pump to skimmer out from pump to filter in then filter out to returns

Jacuzzi Filter... | Answered on May 11, 2016


This is not that easy to take care of.
1. The building code version and requirements can be different depending on your location.
2. No manufacturer posts that information for that reason.
3. It will require an engineering study and that is required by most building codes.
4. Supporting structure may be only part of the issue, gates, alarms etc are required by some jurisdictions.
Remember that water weighs 8 lbs to the gallon and a hottub can hold a lot of water.

Jacuzzi Pool &... | Answered on Apr 09, 2016


If your GFCI is tripping, it could be due to a bad heater element, pump, blower or ozonator. To determine which component is causing the problem, unplug the components one at a time and turn the breaker on. If the breaker does not trip after unplugging the pump, ozonator or blow, you've found the problem and you can now replace that component. If you've unplugged all three components and the breaker still trips, it's likely the heater element. Hiring a technician or replacing the heater is the next best course of action.

Jacuzzi Water... | Answered on Apr 06, 2016


Try and blow the lines out with air, sounds like something is stuffing the water jet. Drain system and turn off power first.

Jacuzzi EH0 /... | Answered on Feb 15, 2016


replace pump.

Jacuzzi EH0 /... | Answered on Feb 10, 2016


Shut water off and remove knobs. Replace valves on side leaking. Go to Home Depo they will help.

Jacuzzi EH0 /... | Answered on Feb 09, 2016

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Jacuzzi Experts

john h

Level 3 Expert

19466 Answers

Marvin
Marvin

Level 3 Expert

84540 Answers

ray gallant
ray gallant

Level 3 Expert

61866 Answers

Are you a Jacuzzi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...