Jacuzzi Logo

Jacuzzi Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 376 Products
  • 2K Answers
  • 311K Views

Yes, I replaced mine from the top. It's fairly easy. You have to pop it out after you get the trim off carefully and then pull the air switch out remembering to get the 1/4 house to come out with the air switch so you can detach it and connect the new one.

Jacuzzi Home | Answered on Dec 05, 2017


Any recommended (see the tub instructions) cleaning product should be fine in the heater -- and the higher temperature of the "cleaning solution" should enhance the process. Just be sure to flush the tub's entire system with clean water before you bathe in it again!

Jacuzzi S750000... | Answered on Dec 02, 2017


check recirculation pump the heater element and pressure switch

Jacuzzi Pool &... | Answered on Nov 26, 2017


wrong union wrong threads

Jacuzzi MAGNUM... | Answered on Nov 26, 2017


Contact Maryland Hot Tub Repair - Pool and Spa Service and set up a Diagnostic service call. Here is there contact info: Maryland Hot Tub Repair - Maryland Pool Service - Maryland Spa Repair Pool Parts - Spa Parts - Hot Tub , Pool and Spa Repair - Pool Opening - Pool Closing - Pool Service 410-304-2463 http://www.maryland-hottub-pool-spa-repa... or see them on http://marylandhottubrepair.blogspot.com...

Jacuzzi DX50-959... | Answered on Nov 21, 2017


Cheap plastic fatigues with heat . Silicone will work but will not keep the crack from continuing. The fix depends upon what type of plastic you have . It is likely a polyester like fiberglass in which case you can use regular fiberglass to fixit . Rough up the outside with 80 grit , brush in fiberglass resin ( don't forget to mix in hardener) lay in glass material , repeat until built up . Repair the front with a good "gelcoat " repair kit which allows you to mix match color.. sand with 220 , then 600, then 800, then 1500, then 3000 , polish with automotive whit polishing compound , wax

Jacuzzi Home | Answered on Nov 17, 2017


you do not want to replace the motor only, the pump is handled as a unit... there are seal issues, etc.

Jacuzzi Magnum... | Answered on Nov 09, 2017


Check under skirt and see if gfci receptacle has tripped. If it has you should call electrician.

Jacuzzi Home | Answered on Nov 03, 2017


check to see if recirculation pump is working if ok check pressure switch if ok check heater element and temp sensor

Jacuzzi Premium... | Answered on Oct 24, 2017

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Jacuzzi Experts

john h

Level 3 Expert

19466 Answers

Marvin
Marvin

Level 3 Expert

84565 Answers

ray gallant
ray gallant

Level 3 Expert

62106 Answers

Are you a Jacuzzi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...