Jacuzzi Home - Recent Questions, Troubleshooting & Support


Should be one on the motor and also check to see if there is a GFCi somewhere too. Could be around where the jacuzzi switch is.

Jacuzzi Home | Answered on Feb 10, 2019


Did you see any mold? Did you see any areas that are wet? TOXIC is a term that is used to describe something that is poisonous. I think you mean noxious which means unpleasant and possibly harmful. The smell of sewage would be classified as this.

Jacuzzi -... | Answered on Jan 28, 2019


try moving by hand they are calcified

Jacuzzi Home | Answered on Nov 04, 2018


the motor could be seased, can you get to back of motor to see if it's spinning

Jacuzzi Home | Answered on Sep 23, 2018


look online using make and model or check manufacturer site for one

Jacuzzi Home | Answered on Jul 10, 2018


either turn on pump or fix recirculation pump

Jacuzzi Home | Answered on May 18, 2018


recirculation pump not working replace

Jacuzzi Home | Answered on May 02, 2018


Hi,
Have a look at the leaking jet & decide whether it has a screw thread & a nut fitting in place or if it's bonded to the tub.?
If it's held on by a nut, a new gasket will probably suffice.
If it's bonded on, it will need to be very carefully removed.
The mating faces THOROUGHLY cleaned-up & the exactly right kind of adhesive used, to re-bond the jet onto the tub.
Then it needs to be left to properly dry & cure, before you put any water in it.
Best of luck

Jacuzzi Home | Answered on Mar 15, 2018


I had this same problem. I looked at the motor, and on one end (the end opposite where the water comes out) there is a hole in the middle. In that hole is a regular screw tip, which can be used to turn the motor. I filled the tub, inserted a slotted regular screwdriver and turned it about 8 times clockwise, then 8 times counterclockwise. You should see the whole motor turn. Doing this loosened it up, and then it started.

Once it started, all kinds or residue came out, which was probably why it had stopped working. I hadn't used it for a while.

After getting it running I'm going to run some cleaning solution through it, and make sure I run it more often to prevent this in the future.

Jacuzzi EH0 /... | Answered on Mar 04, 2018

Not finding what you are looking for?
Jacuzzi Logo

910 questions posted

Ask a Question

Usually answered in minutes!

Top Jacuzzi Home Experts

US Parts Center
US Parts Center

Level 3 Expert

719 Answers

Mike

Level 3 Expert

4357 Answers

john h

Level 3 Expert

19466 Answers

Are you a Jacuzzi Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...