Accidentally put in blade before
For these cases there is a special tool with three callipers and a centre screw. With this tool you can pool the blade. On other way is hang the juicer on two metal flat very thick sticks which can be secure in two bricks or thick wood blocks which must be just one inch higher than the height of your juicer., one in one side and second in other. And by using a plastic or wooden hammer you hit over the axis so the blade will become loose and come out.
Under the juicer you can put something soft like a towel so if the juicer falls down to keep it safe.
Jack LaLanne Power Juicer
Hi smer67 - This is what it says on the official site about spare parts: See the back inside cover of the instruction manual for the spare parts order form or call: 1-973-287-5150
(MON-FRI 9AM to 7PM EST & SAT 9AM - 5PM EST). If this answers your question PLEASE rate this as fixed. If you need more help just add a comment and I'll be happy to assist you further. Thanks.
Jeff
Jak lalanne not working
Regarding Jack Lalanne juicer. After making sure nothing clogs the blades., make sure the stainless bar is on the correct slots on top of the juicer, left and right. It has a safety switch that when its not closed properly, it won't run.
Not finding what you are looking for?