J4constructioncom Vacuums - Page 2 - Recent Questions, Troubleshooting & Support

Use following two manuals for help. 107411142_UM_Elite_gr1.indb (gzhls.at) SM9099624000.ashx (advance-us.com)

I would check the user manual. That said, the following may or may not fit your model: Ensure that the hard floor cleaner is powered off and unplugged to avoid any accidents. Push a flathead screwdriver into the hole guidance, located at the back towards the bottom of the handle. The handle can then be released by pulling upwards. If this does not work, you may need to contact the manufacturer's customer service. Don't be embarrassed about that. Devices are often tricky about assembly and disassembly and offer one very elusive way to come apart or require special tools.

yes you should get some kind of power indicated that power is on the machine i would first check the circuit breaker and then assure that you have power coming out of the outlet after which you could then use a multimeter to folow where you do have power going to sometimes it could also be a bad switch on the unit itself but first assure where you do have power going to and any further questions message me back Thanks Rick

Question edited for clarity and add maker. Sears usually have parts diagrams. This isn't a particularly well known model. https://www.google.com/search?q=1999+Kenmore+Destiny+3000+vacuum+beater+bar ..

The most likely reasons are the heating element has failed or it is blocked with limescale All question need full 'make model (what is is)' please. Very often specific models have 'history'. Google make model no steam ..

It likely needs a new element. Contact support as suggested in the manual. https://www.google.com/search?q=sienna+window+steam+cleaner+isn%27t+producing+steam ..

NO! it is a topical steroid used for treatment of ezcema and psoriasis........it makes the skin thinner and slows down skin regeneration..would make the healing of piles slower and more difficult. visit your doctor...in thr meantime "Germoline" is pretty good

I had a similar problem and fixed it myself. I can show u what I did if its the same problem.

Question edited for clarity, add (what is is). Question moved from Computers. There are LOTS of Choices. https://www.google.com/search?q=Genesis+Hausmeister+manual ..

If it is brand new, check there is water in it, and if there is, empty it and claim on warranty. If it is new to you but secondhand, try descaling it with CLR. Ideas here https://www.google.com/search?q=Russell+Hobbs+Floor+Steam+Cleaner+RHSM1001-G-AZ.+worked+for+1+minute+and+then+stopped+steaming ..

Unfortunately, I don't have specific information on the Haan Si-35R steamer mop, including details about its thermal fuse. However, I can provide you with some general guidance on thermal fuses. A thermal fuse is a safety device that interrupts the flow of electricity in case of overheating. They are typically designed to be non-resettable and need to be replaced if they are triggered. Here are some steps you can take to determine the type of thermal fuse needed for your steamer mop: 1. **Check the Manual:** Refer to the user manual or any documentation that came with your Haan Si-35R steamer mop. The manual may contain information about the thermal fuse, its specifications, and where to obtain a replacement. 2. **Inspect the Existing Thermal Fuse:** If the thermal fuse in your steamer mop has blown, you can inspect the fuse itself for any markings or labels that indicate its specifications. Note down any information such as voltage, current, and temperature rating. 3. **Contact the Manufacturer:** Reach out to Haan customer support or the manufacturer to inquire about the specific thermal fuse needed for your model. They may be able to provide you with the exact specifications or recommend a suitable replacement. 4. **Measure the Fuse:** If you have the technical expertise and the necessary tools, you can measure the dimensions of the existing thermal fuse and check its electrical specifications. Be cautious and ensure the device is unplugged before attempting any measurements. 5. **Professional Assistance:** If you're uncertain about the replacement process or lack the technical knowledge, consider seeking assistance from a professional appliance repair service. They may have access to replacement parts and can ensure the correct installation. When replacing a thermal fuse, it's crucial to use a fuse with the same or equivalent specifications to maintain the safety and proper functioning of the appliance. Using an incorrect or incompatible thermal fuse can pose a safety risk. Keep in mind that the availability of replacement parts may vary, and it's essential to obtain the correct part for your specific model. Always prioritize safety and, if in doubt, consult with the manufacturer or a qualified technician.

Please any answers, anyone? I have the same problem and have become very disgusted with the purchase of the Bissell crosswave.

Palume masina kasutus juhendit.

Question edited for clarity. Do the Shark Rocket filters look the same? You may have to cut your own. https://www.google.com/search?q=Pensare+Rocket+1000+watt+vacuum+cleaner.+replacement+filters ..

All questions need full make and model https://www.google.com/search?q=sonic+clean+vacuum They make a few models in upright and floor compacts. You have a blockage somewhere. When something is obstructing the flow, the motor is still trying to suck air. It has to go somewhere, so it blows instead. The blockage could be anywhere, but you mention brush rolls, so on an upright, remove the base plate and the brush and check the hole behind it. In a vacuum with a hose, check the hose itself and the motorized brush head, the same hole behind the brush. https://www.google.com/search?q=sonic+clean+vacuum+no+suction If your vacuum's suction power has decrease with use, this is because 1) the filter bag needs to be changed and/or 2) the vacuum has a clog in the suction path. For clog removal instructions, please reference page 10 of your vacuum's user manual.

Soft Carpet Upright Vacuum - Soniclean

..

That's weird. When the handle is up on the Hoover WindTunnel T-Series U6439-900 Bagless Upright Vacuum Cleaner, the brushroll will not run. This vacuum is designed to run the brushroll only when the handle is in the lower (or operating) position. I'd suggest contacting Hoover for help.

I don't find specific information about this problem. Here are some things to try. If they don't work, you may call beldray customer service. Check the water tank: Ensure that the water tank is filled with enough water and is properly inserted into the mop. Clean the mop head: Remove the mop head and clean it thoroughly. Dirt or debris on the mop head can cause clicking noises. Check for blockages: Check for any blockages in the nozzle or steam outlet. You can use a needle or pin to remove any blockages. Descale the mop: If your mop has not been descaled in a while, it could be causing the clicking noise. You can descale your mop by following the instructions in the user manual.

save to favorites https://www.youtube.com/watch?v=iDJFge5EptY https://www.lakeland.co.uk/content/documents/46386_label_2.pdf

Question edited for clarity, add CAPS and spaces. No one has done this yet, and it is a virtually unknown brand, at least in North America. https://www.google.com/search?q=johnny+vac+222+disassembly You could ask them https://www.johnnyvac.com/en/all-parts ....

This question needs 'make model what it is)' please as first 3 words. https://www.google.com/search?q=1698+series ..