Itech Radio Communications - Recent Questions, Troubleshooting & Support
I-tech blueband headphones, how to parring?
The Itech manual I have says to try 0000 or 8888 or 1234 Codes to Sync it up. I did the usualy 0000 until I was blue in the face then read the Chenglish manual, 8888 worked for me. These Itechs are a bit different but VERY kewl.
I.Tech BlueBand Bluetooth Stereo Headphones
Hi, In some states, hands free driving is the law. In order to avoid a ticket you need to talk on your cell phone with a bluetooth headset or speaker or with a headset that attaches directly into the phone. Bluetooth headsets are popular for this and other reasons but connecting it to your phone can be confusing. Here are some steps to help you connect your bluetooth device to your cell phone.
Instructions
Things You'll Need:
* Bluetooth headset
* Bluetooth capable cell phone
Read the owners manual for your bluetooth device. You will need to find the code to pair your headset to your phone. This code is usually 0000 (those are zeroes) but verify before you proceed.
Enter your bluetooth option on your cell phone. These can be found in your menu under "bluetooth," "connections," "settings," or something similar.
Turn on your bluetooth headset and put it in pairing mode. Pairing mode means the bluetooth is ready to be found by your cell phone. To pair your headset, follow the owners manual for your specific bluetooth model.
Select "add device" or "search for new device" from your cell phone. Your cell phone will then search for your bluetooth. Once it is found, or discovered, you will need to enter the pairing code (most likely 0000, check your manual to verify).
Select "connect" to finalize the connection if the bluetooth headset didn't connect automatically after the pairing code was entered. Make a test call with your bluetooth in your ear to ensure it is connected properly.
Hope it helped.
And please don't forget to rate me...
Thanks and have a nice day...
CODE
Beste,
Wat is de code voor een bluetooth oortje i-tech my voice 307?
wij kunnen deze niet meer pairen, weten de code niet meer.
Graag terug antwoordt op ons mail adres.
sesssS
What is the pairing code?
The pairing code is a sort of a password that only the primary sender will have on their devise and this code in turn reflects unto the secondary receiver. Failure to insert this code within few seconds the devise will fail pairing and you have to start over again, switching bT on and off again.
Up to last day my Bluetooth device was working
hi,you have described a problem with the computer, check if the computer Bluetooth is wirking using another device, your phone?Make sure the device is visibal to the computer, using the phones bluetooth settings.If it is visibal then the problem is the headset. turn off the headset then turn it back on holding the power on button for at least 13 seconds. now check the compoter to see if it is available.
Not finding what you are looking for?