iSymphony Popular Questions, Answers, Tips & Manuals

[email protected] can usually help you with this.

You didn't say what TV you have so my response is somewhat generalized. This is most often caused by the wrong code on the universal remote. Most things work, but not all. Sometimes just one button will not work correctly or at all. Try the other codes that are listed for your brand. If no luck, try the scan feature as many TV's are built by a manufacturer that's not the one on the front of the set. In some cases, universal remotes just can't do all the things that the original remote did. You might have to try different brands of uni-remotes to find one that works all the features that you need.

Check wither the timer is set to 5 minutes. If not, The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Most power cords use a connector to the appliance that conforms to an international standard though some of these "standard" connectors are so little-used they would seem to be special to most ordinary folk. Most domestic sound and vision has for some time mostly used the "figure-of-eight" reversible 2-pin connector. If yours is this type, they are available in a variety of lengths from almost anywhere. I can't comment further without sight of your power cord.

RCA remote control have no set-up code for this TV brand. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some online sites too, which deals with electronic spare parts.

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.

have problem with the lcd panel connection. there is ribbon (normally gold color ) connection to the Lcd panel which would be sticked to the panel using a special type of glue and pressing machine. If there is any problem in the those contact then this type of problem can occur. You can try to manually press the contact to get ride of the problem. The problem is its not easy to reach to the panel connections , you ave to remove all most all the parts of the tv to reach to the panel connection. www.electro-medical.blogspot.com

If it is learning remote, you can. If you wish to get more; check the sites linked here. http://electrohelponline.blogspot.com/

hey, try connecting the dvd player to HDMI2.

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/ Blinking codes details to many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.

I found the PDF version of the manual here. ISYMPHONY MANUAL PDF USER GUIDE Ready for downloading and reading. http://www.onlinemanualguide.com/isymphony-manual-pdf-user-guide/

1. On the Philips music system, press FM repeatedly until [BT] (Bluetooth) is displayed on the display panel. The Bluetooth indicator flashes blue. 2. On your phone, go to Settings and turn on Bluetooth. Press Scan. Your phone will start searching for nearby Bluetooth-enabled devices. 3. Select 'PHILIPS_BTM2180' on your phone and, if necessary, enter '0000' (no quotes, all zeros) as the pairing password/key. After successful pairing and connection with the phone, the Bluetooth indicator on the Philips system will turn solid blue and you will hear two beeps coming from it. 4. Start playing music on your phone and enjoy hearing it from the speakers on your music system !.

No your remote does not "Turn off", although significantly less power is used while the remote is not in use. This is the same regardless of model.

Even a firmware update, won't change the possibility to change the resolution on the TV. Updates are only released for small bugs in the original software, Not because users want to do something different with the device. I think you will have to learn to live with the limitations of the TV. Or buy a large screen computer monitor. Sorry I can't change this.

Depending on what you want, Just make sure it is made to hold at least a 32 inch LCD TV . If you would like to tilt it, buy a tilt mount. It needs to be mounted to the studs in the wall for best support. I recommend you pre wire the cables before hanging the TV,since they will be hard to get to after the set is mounted.

If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops.

You need to be on a digital channel, standard TV will show in the middle of the screen, like letterbox. If you're using an antenna, go to channel 2.4. if you have cable, go to a higher number channel (on fios, channel 2 digital is 502)

http://www.isymphonyproducts.com/IM%20LC42iF56.pdf Try the above link to download the manual. Gopakumar Gopalan Google

Back-light inverter problem. Contact any service technician. Gopakumar Gopalan Google

The fluorescent ballast has taken the proverbial dump. Take a light and look at the screen closely from different angles. See if the menu from the remote is in the darkness of the screen. If so, your backlight went out, or at least the capacitors that fire it. Get a new unit unless you know electronic repair.