Intel Science & Laboratory - Answered Questions & Fixed Issues

Have you tried here? https://download.cnet.com/intel-play-qx3-microscope/3000-2110_4-104288.html

http://semantic.gs/intel_play_qx3_microscope_driver_download https://www.helpjet.net/Fs-43319818-27352188-64981433-devices.html

Sure, they can be downloaded easily by using this software: Driver Update Software for XP Vista 7 8. Wish you best of luck. Cheers

Here are the instruction for installing the QX3 (or QX3+) Microscope with Vista and Windows 7. You must be using a 32-BIT VERSION. The QX3 is not compatible with 64-bit versions. Note, DO NOT use the software from the CD that came with the microscope. DO NOT plug in the QX3 microscope until Step 4. Step 1. Download and install the QX3PLUS.EXE software from Intel: http://tinyurl.com/QX3-Win7-Files Step 2. Download and install the QCODINSTL.EXE software from: http://tinyurl.com/QX3-Win7-Files Step 3. Download and extract the QX3 Drivers from: http://tinyurl.com/QX3-Win7-Files Step 4. Now, plug in the microscope. When the "Found New Hardware" wizard appears you will see a message saying that the driver installation was not successful. Click the Close box. You need to install the driver manually by following these steps: a. Click START - Select Devices & Printers b. Right-click on the Intel QX3 Icon and select Properties c. Click the Hardware tab - click Properties d. Click Update Driver - select "Browse my computer for driver software" e. Browse to the folder with the extracted QX3 drivers from Step 3. above. The driver software should install successfully. Before you run the QX3Plus program right click the icon, click on "Properties", click the "Compatibility" tab, check the box next to "Run this program in compatibility mode for:", then choose in the drop-down box "Windows 98 / Windows ME". You should also check "Run as Administrator" if your account is a "Standard user". Step 5. Now double-click on the QX3+ icon on the desktop and the program should run. ------------

Before you run the program, right click the icon, click on "Properties", click the "Compatibility" tab, check the box next to "Run this program in compatibility mode for:", then choose in the drop-down box "Windows 98 / Windows ME". You should also check "Run as Administrator" if your account is a "Standard user".

The miXscope software works great. It is $18 from: miXscope Mac Microscope Software The free Macam software works on older Macs with OS 10.5 (Leopard) but has trouble with newer versions. Give it a try: macam USB webcam support for Mac OS

Here are the instruction for installing the QX3 (or QX3+) Microscope with Vista and Windows 7. You must be using a 32-BIT VERSION. The QX3 is not compatible with 64-bit versions. Note, DO NOT use the software from the CD that came with the microscope. DO NOT plug in the QX3 microscope until Step 4. Step 1. Download and install the QX3PLUS.EXE software from Intel: http://tinyurl.com/QX3-Win7-Files Step 2. Download and install the QCODINSTL.EXE software from: http://tinyurl.com/QX3-Win7-Files Step 3. Download and extract the QX3 Drivers from: http://tinyurl.com/QX3-Win7-Files Step 4. Now, plug in the microscope. When the "Found New Hardware" wizard appears you will see a message saying that the driver installation was not successful. Click the Close box. You need to install the driver manually by following these steps: a. Click START - Select Devices & Printers b. Right-click on the Intel QX3 Icon and select Properties c. Click the Hardware tab - click Properties d. Click Update Driver - select "Browse my computer for driver software" e. Browse to the folder with the extracted QX3 drivers from Step 3. above. The driver software should install successfully. Before you run the QX3Plus program right click the icon, click on "Properties", click the "Compatibility" tab, check the box next to "Run this program in compatibility mode for:", then choose in the drop-down box "Windows 98 / Windows ME". You should also check "Run as Administrator" if your account is a "Standard user". Step 5. Now double-click on the QX3+ icon on the desktop and the program should run. ------------

Here are the instruction for installing the QX3 (or QX3+) Microscope with Vista and Windows 7. You must be using a 32-BIT VERSION. The QX3 is not compatible with 64-bit versions. Note, DO NOT use the software from the CD that came with the microscope. DO NOT plug in the QX3 microscope until Step 4. Step 1. Download and install the QX3PLUS.EXE software from: http://tinyurl.com/QX3-Win7-Files Step 2. Download and install the QCODINSTL.EXE software from: http://tinyurl.com/QX3-Win7-Files Step 3. Download and extract the QX3 Drivers from: http://tinyurl.com/QX3-Win7-Files Step 4. Now, plug in the microscope. When the "Found New Hardware" wizard appears you will see a message saying that the driver installation was not successful. Click the Close box. You need to install the driver manually by following these steps: a. Click START - Select Devices & Printers b. Right-click on the Intel QX3 Icon and select Properties c. Click the Hardware tab - click Properties d. Click Update Driver - select "Browse my computer for driver software" e. Browse to the folder with the extracted QX3 drivers from Step 3. above. The driver software should install successfully. IMPORTANT: Before you run the QX3Plus program for the first time, right click the "Intel Play QX3 Microscope" icon on the desktop, click "Properties", click the "Compatibility" tab, check the box next to "Run this program in compatibility mode for:", then choose "Windows 98 / Windows ME" in the drop-down box. You should also check "Run as Administrator" if your account is a "Standard user". Click "Apply" then "Ok". Step 5. Finally, double-click the "Intel Play QX3 Microscope" icon on the desktop and the program should run. If you get a message that the microscope is not plugged in, quit and restart the program. If the program hangs or crashes, reboot the computer, then restart the program. ------------ Comments and suggestions to mmehall [at] yahoo.com ------------

Here are the instruction for installing the Intel QX3 (or Digital Blue QX3+) Microscope with Windows 7 or Windows 8.1. You must be using a 32-BIT VERSION of Windows 7 or 8.1. Note: The QX3 is not compatible with 64-bit versions of XP, Vista, Windows 7 or 8. Note, DO NOT use the software from the CD that came with the microscope. DO NOT plug in the QX3 microscope until Step 4. Step 1. Download and run the QX3plus.exe program from: http://tinyurl.com/QX3-Win8-1 After the program installs, uncheck "I would like to view the README file." Click "Finish". Step 2. Download and run the qcodinstl.exe program from: http://tinyurl.com/QX3-Win8-1 If asked about NTVDM, click "Install this feature" then click "Close" Step 3. Download IntelQX3driverXP.zip and save (do not open) the file from: http://tinyurl.com/QX3-Win8-1 Step 4. Now, plug in the microscope. The driver should load silently. If the "Found New Hardware" wizard appears and you get a message saying that the driver installation was not successful. Click the Close box. You need to install the driver manually by following these steps: a. Right-click START - Select "Device Manager" b. Right-click on the Intel QX3 Icon and select "Update Driver Software", select "Browse my computer for driver software" e. Browse to the Download folder with the extracted QX3 drivers from Step 3. above. The driver software should install successfully. IMPORTANT: Before you run the QX3Plus program for the first time, right click the "Intel Play QX3 Microscope" icon on the desktop, click "Properties", click the "Compatibility" tab, check the box next to "Run this program in compatibility mode for:", then choose "Windows 98 / Windows ME" in the drop-down box. You should also check "Run as Administrator" if your account is a "Standard user". Click "Apply" then "Ok". Step 5. Finally, double-click the "Intel Play QX3 Microscope" icon on the desktop and the program should run. If you get a message that the microscope is not plugged in, quit and restart the program. If the program hangs or crashes, reboot the computer, then restart the program. ------------ Comments and suggestions to mmehall [at] yahoo.com

Here are the instruction for installing the QX3 (or QX3+) Microscope with Windows 8 and Windows 8.1. You must be using a 32-BIT VERSION of Windows 8 or 8.1. Note: The QX3 is not compatible with 64-bit versions of XP, Vista, Windows 7 or 8. Note, DO NOT use the software from the CD that came with the microscope. DO NOT plug in the QX3 microscope until Step 4. Step 1. Download and run the QX3plus.exe program from: http://tinyurl.com/QX3-Win8-1 After the program installs, uncheck "I would like to view the README file." Click "Finish". Step 2. Download and run the qcodinstl.exe program from: http://tinyurl.com/QX3-Win8-1 If asked about NTVDM, click "Install this feature" then click "Close" Step 3. Download IntelQX3driverXP.zip and save (do not open) the file from: http://tinyurl.com/QX3-Win8-1 Step 4. Now, plug in the microscope. The driver should load silently. If the "Found New Hardware" wizard appears and you get a message saying that the driver installation was not successful. Click the Close box. You need to install the driver manually by following these steps: a. Right-click START - Select "Device Manager" b. Right-click on the Intel QX3 Icon and select "Update Driver Software", select "Browse my computer for driver software" e. Browse to the Download folder with the extracted QX3 drivers from Step 3. above. The driver software should install successfully. IMPORTANT: Before you run the QX3Plus program for the first time, right click the "Intel Play QX3 Microscope" icon on the desktop, click "Properties", click the "Compatibility" tab, check the box next to "Run this program in compatibility mode for:", then choose "Windows 98 / Windows ME" in the drop-down box. You should also check "Run as Administrator" if your account is a "Standard user". Click "Apply" then "Ok". Step 5. Finally, double-click the "Intel Play QX3 Microscope" icon on the desktop and the program should run. If you get a message that the microscope is not plugged in, quit and restart the program. If the program hangs or crashes, reboot the computer, then restart the program. ------------ Comments and suggestions to mmehall [at] yahoo.com

Here are the instruction for installing the QX3 (or QX3+) Microscope with Vista and Windows 7. You must be using a 32-BIT VERSION. The QX3 is not compatible with 64-bit versions. Note, DO NOT use the software from the CD that came with the microscope. DO NOT plug in the QX3 microscope until Step 4. Step 1. Download and install the QX3PLUS.EXE software from: http://tinyurl.com/QX3-Win7-Files Step 2. Download and install the QCODINSTL.EXE software from: http://tinyurl.com/QX3-Win7-Files Step 3. Download and extract the QX3 Drivers from: http://tinyurl.com/QX3-Win7-Files Step 4. Now, plug in the microscope. When the "Found New Hardware" wizard appears you will see a message saying that the driver installation was not successful. Click the Close box. You need to install the driver manually by following these steps: a. Click START - Select Devices & Printers b. Right-click on the Intel QX3 Icon and select Properties c. Click the Hardware tab - click Properties d. Click Update Driver - select "Browse my computer for driver software" e. Browse to the folder with the extracted QX3 drivers from Step 3. above. The driver software should install successfully. IMPORTANT: Before you run the QX3Plus program for the first time, right click the "Intel Play QX3 Microscope" icon on the desktop, click "Properties", click the "Compatibility" tab, check the box next to "Run this program in compatibility mode for:", then choose "Windows 98 / Windows ME" in the drop-down box. You should also check "Run as Administrator" if your account is a "Standard user". Click "Apply" then "Ok". Step 5. Finally, double-click the "Intel Play QX3 Microscope" icon on the desktop and the program should run. If you get a message that the microscope is not plugged in, quit and restart the program. If the program hangs or crashes, reboot the computer, then restart the program. ------------ Comments and suggestions to mmehall [at] yahoo.com ------------

The QX3 files are now located at: QX3 Files for Win7 Comments and suggestions to mmehall [at] yahoo.com

The Windows 7 Files are now located at: QX3 Files for Win7 Comments and suggestions to mmehall [at] yahoo.com

http://download.cnet.com/Intel-Play-QX3-Microscope/3000-2110_4-104288.html

http://download.cnet.com/Intel-Play-QX3-Microscope/3000-2110_4-104288.htmlworked for me Win 7 64 bit. May need to use compatibility mode (look it up separate problem if that's the case)

http://download.cnet.com/Intel-Play-QX3-Microscope/3000-2110_4-104288.htmlshould be even more compatible with Vista then Win 7. Have you tried running these programs in compatibility mode?

http://download.cnet.com/Intel-Play-QX3-Microscope/3000-2110_4-104288.htmlworked for me Win 7 64 bit. May need to use compatibility mode (look it up separate problem if that's the case)

http://download.cnet.com/Intel-Play-QX3-Microscope/3000-2110_4-104288.htmlWorks for me Win 7 64 bit - same basic OS as Vista. May need to run in compatibility mode, I can't remember. That's a windows Vista/7 feature that allows you to run old 32 bit Win XP programs (right click I think)

Try radio shack. They have drawers full of odd sized old bulbs. I found a microscope bulb there a few years ago.

http://download.cnet.com/Intel-Play-QX3-Microscope/3000-2110_4-104288.html worked for me Win 7 64 bit. You may need to run in compatibility mode. Search for that if that turns out to be the problem.