Insignia Radio Communications - Recent Questions, Troubleshooting & Support

See troubleshooting section of user manual Maintaining Your Soundbar; Cleaning Your Soundbar And Subwoofer; Troubleshooting - Insignia NS-SBAR21F20 User Manual [Page 21] ' ManualsLib

Get a i pod bluetooth adopter.

More than likely the rechargeable internal battery has leaked electrolyte, reducing the Ah ("Amp-hour") capacity. Try to remove the cover to see if battery is leaking, looking like crusty dry salt. Even if not leaking, the rechargeable cells have a limited lifespan. If battery, this needs renewal of same V and Ah.

Well i fix it putting on power and pressing both volume buttons for 15 seconds. Then he turned on with no problems

In your Audio section of your PC find "Sound" and select Bluetooth rather than your speakers, and then do not forget to change it back when done.

1. There may be a switch on the headset. Please switch it on.
2. click Connect headset on the Bluetooth window

try 0000 (4 Zeros) if that doesn't work try one of these:
1111, 1234, 9999

Here's the link to the product manual: http://www.insignia-products.com/skins/skin_1/Topics/Documents/07-324%20NS-BTHDP%20reduced%20-%20FINAL.pdf

Typical Bluetooth passcode is 0000.

Insignia support page points directly to Broadcom's, when it comes to software updates for Windows. Take look here.
Hope it works for you.
Cheers! Carlos

Windows 7 should automatically find the device and install the necessary software when you plug in the "Insignia" bluetooth transmitter. Once this is complete (can take a few minutes) you will need to connect your headset. It will connect and attemp to install drivers. It will not find the drivers on Windows Update, but instead it will tell you that you need to download a "Lenovo" driver and go to the broadcom website. Ignore Broadcom as they have removed this from detected devices and will just lock the system up. Instead download the Lenovo "Bluetooth with Enhanced Data Rate Software" driver that it suggests even though you may not have an IBM/Lenovo system.

The filename it downloaded for me was "7zbv14ww.exe", but if you do a google search there is a v15 available but I haven't tried it as the v14 is working perfectly fine for me.

Hope this helps.

if you have the latest update with A2DP.

hi u can get these ear cushions in all bluetooth  accessories shop...

bluetooth Passkey
By default all bluetooth devices come with a 0000 passskey must earpieces won't allow you to change it unless is a very high tech device.
try that remember 0000 is the code.


if it works for you don't forget to rate me
thx

You need a bluetooth adapter,
search for "bluetooth adapter for ipod" on Google or eBay, to see what's around.

put the charger in your headphones and hold both volume buttons
you should see a slight flash of blue light then press the multifunction to turn it on

I bought this headset from Best Buy and it came with a usb dongle.  I also lost the disc.  Insignia's website is useless, and the Broadcomm update website is down at the time of this writing.  After hours upon hours of scouring, I found a working driver, which works perfectly.  This works on Windows XP, but I can't verify that it will work for Vista.    I hope this helps you.
http://drivers.anycom.com/bluetooth/usb-200-250/anycom-bluetooth-usb200-250-windows-v5-1-0-4200.exe

I will never buy Insignia products again because of their lack of driver support. 
Best regards, RobotJay