InFocus Popular Questions, Answers, Tips & Manuals

Question edited for clarity. This doesn't appear to be a known issue, so my view is that the remote has just failed. Try the smartphone forward facing camera trick to see if the remote is producing an output signal. https://www.google.com/search?q=infocus+x9+remote+not+connecting ..

Hi, Please double check that you've focused the lens . and that the screen and the lens are aligned properly. You might have to move the project farther or closer to your screen. Thank you.

There are a few possible causes for a projector like the Infocus IN2124/IN2126 turning itself on and not being able to be turned off with the remote: 1. Remote control issues: Firstly, it's worth checking the remote control itself. Ensure that the batteries are fresh and properly inserted. Try replacing the batteries or using a different remote control to see if the issue persists. 2. Signal interference: Sometimes, external factors can interfere with the projector's remote control signal. Check if there are any sources of interference nearby, such as other electronic devices or strong light sources. Move these items away from the projector to see if it resolves the problem. 3. Faulty power button or control board: It's possible that the power button on the projector or the control board itself is malfunctioning. If the power button is not responding when pressed, it could indicate a hardware issue. In such cases, contacting Infocus customer support or a professional technician for further assistance or repairs may be necessary. 4. Firmware or software issue: Occasionally, a software or firmware glitch can cause unexpected behavior in electronic devices. Check if there are any firmware updates available for your projector model on the Infocus website. Updating the firmware can potentially resolve any known issues and improve overall performance. 5. Power supply issues: In some cases, fluctuations or problems with the power supply can cause erratic behavior in electronic devices. Ensure that the projector is connected to a stable and properly grounded power source. Consider trying a different power outlet or using a voltage stabilizer to rule out any power-related issues. If the issue persists after trying these steps, it is recommended to reach out to Infocus customer support or consult a professional technician with expertise in projector repairs. They will be able to provide more specific guidance and troubleshooting steps based on your particular projector model.

Test the transformer with a multimeter. https://www.google.com/search?q=Infocus+220+litepro+replace+transformer ..

Check the caps on the power board inside the unit. You probably need to recap it. I had that problem on one of the smaller projectors.

https://www.infocus.com/resources/documents/User-Guides/IN112v-IN114v-IN116v-User-Guide.pdf

if the fans run, then ,check the lamp or lamp ballast turn on the projector ,at the same time ,if you can hear a continuous beep beep sound (the ballast igniting the lamp) means the lamp may be fault,and other parts is working well I am an expert of repairing projectors for 19 years. It is my pleasure to receive the message form you, WhatsApp ID:+8613178867858 Skype:[email protected] Wechat ID:+8613178867858 Email:[email protected] Email:[email protected] Mobile:+86 13178867858 http://www.lampdeng.com

Check the menu selections in the manual.

The port or cable is going bad

Check for an EXE file in DOWNLOADS folder. Self-extracting files are usually come in EXE flavour, but may have MSI or ZIP extensions as well. Or go to START, in search-box type keywords like TV, Tuner, etc. to see what win explorer digs up. If that fails, plug in your flash drive, go to CMD console, (DOS commands), type CD\ CLS dir/a/s/b'find/i "nameyouwant">flashdrive:\foundit.txt The pipe symbol ' is Shift+\ "nameyouwant" is any text (filename or part of) flashdrive: is the drive letter, eg F: To append to the search result, use two >> arrows. One > arrow will overwrite foundit.txt with current data.

Seems to me that if the bulb does not turn on it could be a bad ballast.

any use to you? http://www.uns.nu/pdf/Projektor_INFOCUS_LP540_Manual_EN.pdf

Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board..

Windows XP is not longer supported

http://www.ebay.com/itm/InFocus-LP240-LP250-DP2000x-projector-POWER-SUPPLY-CD-/220720929521?rmvSB=true

If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Without a remote control, you can't.

Without a remote control; you can't. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites. http://electro-medical.blogspot.com/ http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

Make sure your lamp cover door is closed all of the way. Try reseating the lamp and then re-closing the access door. http://www.projectorcentral.com/pdf/projector_manual_3354.pdf Here is the manual, see if the lights match up.