Imperial Deep Fryer pilot won't stay lite
When the pilot goes out and won't stay lit is is usually because the Thermocouple safety device has failed.
The burners should never be on when the thermostat is off. That is incredibly dangerous. You need a gas registered service technician.
Have an Imperial IR-6-C commercial gas range. I
Hi Aenriquez,
this is a monster cooker.
I have one at home in pieces, still waiting for refurbishing.
I dismantled the cooker sevaral years ago, so I do not know everything about it anymore.
But the mainsting here is, has it Flame Failure devices.
I think so, bu can not remamber that.
If so, then I would suggest that this item needs to be replaced.
I send you a link where you can find more.
I hope this helps, Dik
Imperial IR 4 S18 Restaurant Range at www ckitchen com
2/3/2018 10:39:03 PM •
Imperial...
•
95 views • 0 helpful votes
IMPERIAL ICV-1 SINGLE DECK CONVENCTION OVEN
this is a common indication that the ignition module is probably going bad or the flame sensor is not sensing the flame on the burners. There are other, more technical issues possible but this is usually the most common. The "not restart" , if referring to the burners, is an indication that the ignition module has "locked out" the system, usually after 3 failures of attempts to light the burners.
10/31/2017 7:15:03 AM •
Imperial...
•
250 views • 0 helpful votes
Not finding what you are looking for?