Hyundai Televison & Video - Page 3 - Popular Questions, Answers, Tips & Manuals

Check the speaker/s first. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/

Check and replace damaged component/s at it main power regulator [SMPS] section circuit. Contact any service technician. Gopakumar Gopalan Google

i think ur t v not support hdmi high resolution it set 768 work properly

You may need the power supply capacitors. You can identify the bad ones by their bulging tops. If you have the wherewithal, they can be replaced for about $10.00 or less.

May need power supply capacitors. you can identify the bad ones by their bulging tops. If you have the wherewithal, you can replace them for about $10.00 or less.

Some component could be defective. The symptom is so vague it could be a million things. Take it to a tv repair shop.

By re-plunging the TV; you're making a hard reset to it each time. If it is so, the TVs' main system control IC, or its memory IC must have faulty. Anyway, troubleshooting to this type of fault will be somewhat difficult even for an experienced service technician. This is not a user repairable fault. Contact any service technician to make it repaired. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. Surf the site with patience. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

your main power board could be on its way out......you can get a repair kit...if you can use a soldering iron...................cheers

Push Menu button on the front panel of the TV, and plug it into AC mains wall socket, while pressing the Menu button. For more information go to http://electronicshelponline.blogspot.com/

Simple google search:

The DVI adapter stops the audio. Use the audio out ports on the bluray player to connect an audio pair cable to the tv.

use a very dark room where you cant see nothing. turn it on and tell me if there is any light on the screen "backlight" http://www.tvrepair.localdomain.me

Check out these answers: http://www.fixya.com/search/p427703-hyundai_q320_32_in_lcd_television/factory_reset_remote

It will be best to replace the power supply regulator board as card basis, rather than trying to repair it. Especially to Plasma. To get some details, http://electronicshelponline.blogspot.com/ Pull up older posts.

The IC will have a number printed on it. Refer with this number, not with this part number. If you're sound in electronics, and wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy. You can also do a search, by type in the brand name/model number/IC used, in the search box at the top right of the display window. Power supply schematic diagrams to many TVs are given. Hopes it will help you to find out the actual number of the IC.

I MAYBE HEAVE 1 BUT NEED MOOR INFORMATION LIKE A CODE OF THE BOARD

If the LCD is more than 2 yrs old .... there may be need to replace some internal capacitors ... they crack and leak and then may not work

Formatting your memory stick will make it workable,if still problem persists than check by changing memory stick.

Where are you from? Without knowing it, how can one point out the authorized service center for Hyundai, near you?

Without its remote control, you can't unlock it. If you have it, check this site for details. http://electronicshelponline.blogspot.com/ Pull up previous posts or type in the brand name and model number to of your set, to its search box, and press 'Enter' or view it in Mosaic / Timeslide option.