Hyundai Televison & Video - Page 2 - Popular Questions, Answers, Tips & Manuals

http://tv.manualsonline.com/manuals/mfg/hyundai/hyundai_flat_panel_television_product_list.html ,,try this link

change the source.. press source or av/tv

The set is now on Service Mode option. You have to reset it to Normal. That is, you have to EXIT this mode. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done. NB: Please read and understand well, the instructions to enter the service mode, before you begin. Be very careful. Note how to "EXIT" the service mode; after entering and adjusting data. This is very important. Search the site by type in the "brand name" to your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Check for any dry soldering joins in the power supply board. Also check the interconnection cables By removing and reconnecting it. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ http://electro-medical.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls. Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.

Hyundai DVD-320A / DVD-360A / DVR-510C

1. Method 1:
2. Turn on the player (without a disc inserted)
3. Press 7, 7, 0

1. Method 2:
2. Turn on the player (without a disc inserted)
3. Press 7, 7, PLAY
4. Select region (0 = multi-region)
5. Press SETUP

1. Method 3:
2. Open the disc tray
3. Press 3, 8, 0, 0
4. Select RC (0=codefree)
5. Press SETUP
6. Close the disc tray

It seems to be the fault with its main digital board. [Vertical synchronization problem]. Anyway, try a factory reset. There are two types of reset to TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Fault to its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

This eBay seller may be able to clone you one: http://www.ebay.com/itm/EZ-COPY-TV-remote-Hyundai-HLT3270-/310481419067?pt=LH_DefaultDomain_0&hash=item484a227b3b

Hyundai: If it's an LCD TV, the panel has been impacted and is not repairable. You didn't provide enough information about the other TV to answer. It could be the power supply or the Main board. Price would depend on which one is bad, and model number.

check your dvd player fuse

Hi Ziyaad One of the following sites may be able to assist with a replacement. Trust this helps, regards Alan HYUNDAI REMOTE CONTROL WORLD shop with original and replacement remotes... or Amazon co uk RemotesReplaced hyundai Electronics Store or Hyundai Remote Control Spares

If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops.

What is the model number to your Hyundai TV? Doesn't both your computer and TV have VGA sockets? Provide more details; please. http://electronicshelponline.blogspot.com/

Just buy a Samsung galaxy anything. They have ir remotes built in. It's how I operate my tv, blue ray and so on. Watch on has a good remote, but you can download more if need be.

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Tu unlock the keypad lock, you should have a remote control. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops.

www.alibaba.com/ Try this on-line store. http://electronicshelponline.blogspot.com/

Cabinet rattling. Contact any service technician to fix any loose fitted screws or any.