ELECTRICS 101 (do you live in the RuST belt? ) wiki it.
first tell all electrics that work and do not (brief), and if engine runs and drives ok.???
all lamps inside and outside matter.
BLINKERS (TURNS) DEAD REAR. well that is bad wring on the rear.
(left rear and left front run off same wire) same is true
what did brake lamps do? BOTH DEAD AND THE 3LAMP TOO usa?
3 dead blinkers.
try a real ASE shop with tech and ASE badge on the sleeve.
the do now what to do,
all 10 + outside parking lamps work? 4 corners and sides.?
the cluster back ground lamps are on a dimmer it must be turned to high to see them. did kids play with dads car.? oops.
this year car like most that year, up have thing called BCM
the body brain I CALL, AND RUNS ALL LAMPS .
I WILL NOw RTM READ THE SERVICE MANUAL FOR YOU.
SO THE 4 SHOPS LOST THERE SCAN TOOL, that? ?????????
all fuses good, and scans show not one DTC error, i bet not.
let me begin at TURNS dead rear.(which one bad front NOT TOLD)
wow.
no hacked up added trailer hitch jack on car right, we look for that
after all fuses tested good (as in ALL)
do hazards work on all 4 corners, now that is so important on any car as huge clue #1
the T/sig fuse (ip box) is not blow due to front lamp 1 does flash.
the HAZARD fuse must be good or all 4 corners are dead.
now the turns. , the turn switch sends left to front and rear on 1 wire.
same with right.
see how front and rear use the same wire feed
so if rear fails you have bad (wrong lamps) or wiring bad.
for sure.
i bet hazards fail the same way. for the same reasons.
dash illuminations side is
cluster fuse blown, in IP fuse box. dash
same box
ROOM LP fuse
the dash brain, MICOM goes dead too, lacking both fuses good.
the head bolts are TTY bolts set by angle and are never REUSED
TTY= torque to yield.
quote
Install cylinder head bolts.
