Hyundai Computers & Internet - Answered Questions & Fixed Issues

Question edited for clarity and spelling. Please do not type in all CAPS, it is considered SHOUTING and is more difficult to read! You are the only person in the world to have this make and model combination! https://www.google.com/search?q=HYUNDAI+HY960 Genuine OEM Remotes or Facsimile Remotes are readily available. https://www.google.com/search?q=home+theatre+replacement+remotes ..

https://www.justanswer.com/car/1kisa-need-know-numbering-pistons-1-6-2002.html

A badly worn clutch, misadjusted clutch can cause that.

Hyundai power supply Model: SAW30A-120-2000U Input: 100-240V 50/60Hz 0.8A Output: 12V 2000mA www.szyingyuan.com

There is a reset button on the to the left of the phone button on top of the navigation LCD

are you sure that it is a 1.6 motor as 1.6 motors use a belt not a chain your statement that it has 12 on each cam indicates that it is a v engine or a double over head engine in any case you do not count links but put the colored links directly over the sprocket dots you have to use a cam locking tool to get it right

you can check the intermediate gear

Do a factory reset and see if that works.By the way Irish is english

I have always had good luck with DVI to HDMI converters. My advice would be to find another monitor and see if it works on that. If it does, then you know the signal is getting through. It might be a setting on the PS3 as well. I'm only familiar with PC to monitor conversion.

no but could be the alternator drive belt slipping or about ready to break off

go to the manufacturer web page for the speakers and download the driver go to control panel , audio /speakers and click on properties and check for compatibility

Hi Mjau_beibi, Technically, yes. It requires a level of expertise though. You would want to start by replacing the pixel panel. (Which is inside of the monitor and requires knowledge of monitor repair) - I would not recommend doing it yourself unless you are familiar with in-depth repair of components like this. Depending on the cost of the repair, it may be worth it to purchase a new monitor unfortunately. Sorry for the relatively bad news. Hope all works out! - Cheers!

Without knowing what your model number is for your monitor there's no way to tell what your resolution capabilities are. But most likely you are onto the solution which would be your manager resolution is set to the wrong setting. You will need to adjust that if it is possible otherwise you'll need to get a new monitor if you want to see the correct view.

ghosting is a memory problem, the monitor has a memory chip this helps with the video rendering to display the image, the chip can over time become damaged like any other memory chip, its its read use delete type but some times it can take longer to delete this then gives you the ghost shadow. it can sometimes be the software glitching, but there is no way to fix the firm wear on the monitor as the chip is pre programed before the monitor is assembled.

I know of no such reset on a car radio.

If you take to an accredited service provider you should haven't any problems, in any case a service warranty will kick in, don't go to back yard mechanics, cheapest is not normally the best solution.Good Luck

If the rest position, that is the position that you say is 2" high, is always the lowest the wiper arms go. By that I mean it definitely doesn't go any lower during wiper operation, then on some cars you can remove the wiper arm from the motor shaft and replace it slightly lower. May not be possible on your car, but I have done it on a previous car as the motor shaft is splined like a gear cog and allows for adjustment. Just make absolute certain that the wiper doesn't go too low as this will put undue pressure on the motor action when it is forced against the car body or windshield trim.

Your sound device is defective, front channel is inoperative. Should be checked by a radio-technician

Disconnect from computer and try it on another. might be a video card issue, disconnexion will show if this is the problem. Does it do this when the computor is off? If it is not a computer issue then try resetting to factory default. It might be that the screen is going but this is usually evidenced by loss of picture or darkening rather than vari-colour lines please amend and resubmit query

Did they both stop working at the same time? If so, it's likely not the batteries. The chance of both keys (I assume they're remote keyless entry) failing at the same time are very slim. Still, replacing the batteries shouldn't be that hard. If so, and the keys are still not working, it's the receiver in the car. Check the fuse for the remote key entry system first. If that's good, you probably should take it to your dealer.