Hyundai Computers & Internet - Page 4 - Popular Questions, Answers, Tips & Manuals

Make sure you select the right resolution.

http://www.ehow.com/how_6372_adjust-monitors-resolution.html

For the games you need to configure it within the game itself :D

You don't really update the drivers for your monitor. If you want to update your video drivers. I'm guessing because it's a Compaq Presario PC that it uses Integrated Radeon graphics acceleration so to update those drivers go here. Once there you will need to select Integrated Motherboard Graphics in the first block. From there on I will need to know the exact model number of the Compaq PC to proceed.

I believe that this site (fixya.com) is just a help site. I have found that in the past ten years, every TV set and computer as wll as several other devices have used the same type of power cords. If you have an older computer around, then the cord will fit most TV sets. You could drop by a computer fixet it store and they will either give you or sell cheap, (<5bucks) an old power cord. You could also look at the electronic store and find a usable cord that you can subs5titute.

The mistake most often made with this kind of problem is that people don't remember to plug in the sound cable from their computer to the monitor. You need a separate sound cable to carry the sound.

If it is hooked up, you can use the monitor's menu to check for proper setup.

Sounds like you have some bad electrolytic capacitors.
If you are tech savvy, open up the unit and look for capacitors that have bulging tops or leaking electrolyte / bulging at the bottom and replace any/all that look like this.
In most cases, this will fix you right up quick.
It's the right age for this to be the most likely issue.
The capacitors will be near the power input and the inverter stages of the circuitry.

This would be in the settings using your remote to go to the settings or setup. You will find that configuration using your manual. Thanks for using FixYa! John

If the speakers are built in, check that the volume on the speakers via OSD is not turned all the way down or off. Many monitors that have speakers have an audio amplifier as the sound output from computers is very low and requires a powered speaker system in most cases. They are designed to operate head phones only now a days.

Jim

You have already vrify that the sound card and setting in the computer is OK? You can try feeding the audio source from MP3 player to see if you will get the sound OK. If it still does not work, to fix the sound circuits will cost you more tahn a good set of powered PC speaker system, you may want to think about that first before putting money into this monitor.

Basic LCD monitor and TV troubleshooting guide: http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide http://www.fixya.com/support/r7406380-tv_training_manuals Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series. Please leave rating if it helps.

it has a problem on button or other wirings not connected on the main...

It is extremely unlikely that your issue is related to IE.

This usually means the backlight has failed and it is not cost effective to repair. Some monitors with a faulty power supply will exhibit this fault too. If the power supply is external (a little DC "brick") Try and find a replacement with equal voltage and similar (preferrably more) current rating (e.g. 12VDC, 3 Amp). This can be a cheap fix - especially if you have a spare power supply lying around. Often many different monitors can use the same power supply, so if you have another dead one, or know someone with one, you can try that - the connector will even most likely be the same.

12V @ 3-4 Amp power supply like the one on this ebay page >>Link<<

Hope this helped.

It could be that you have a defective drive. Attempt to return the drive and explain that you believe that it is a defective product and ask for a replacement or a refund.

problem related to lcd lamp supply
just replace the power supply(called inverter board) connected to the lcd panel lamp

Possible errors in the OS and it will be good to use the restore action so as to set the PC to an earlier set date. make sure your PC is virus free. If you have the same issues then the OS must be reinstalled, the drivers installed after a good anti-virus is also installed.

Well, in most cases, the only location where something can be loose where a user is involved, is the cable connection to the VGA or DVI card and/or to the monitor.

Make sure the pins are not bent.

There are no user serviceable parts on the monitor, in general.

Service should be sought out at an authorized Hyundai service center.

If within the warranty period, then you may be able to get it repaired or replaced for free.
If not, there will be a charge for the service, if the unit is even serviceable after a certain period of time
outlined by the service center.

Good luck on this .

If you don't want to pay, just ask your question.
If you do want a quicker answer, choose the payment option.

THAT PROBLEM WILL BE BACK LIGHT DAMAGE TO BE REPLACE BACK LIGHT

If you are going to DIY and already try the monitor with another PC, and have proper tools and know safety precaution then please read on: Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/albums/yy352/budm/ Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor and TV troubleshooting guide: http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect your hard drive Test the leads that attach to your ((hard drive from the motherboard)) or replace all the leads that attach to your hard drive including electrical extensions + IDE,SATA and the ones that attach from your ((motherboard to hard drive)) make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electic extensions or just replace them they are probably old and faulty a computer needs its connections to have an end so any faulty leads will end up with a computer error hope this helps