Husqvarna Popular Questions, Answers, Tips & Manuals

If you are getting smoking and a burning smell DO NOT use it. It is a SERIOUS fire hazard. Yes, it is probably a burnt out set of brushes in the motor or the motor itself. You also could have a problem with the pedal itself. it could be sticking in a pedal down position causing the continuous running of the motor. I would suggest you take both to Good repairer and he will be able to give you a price for repair. 50 is a good age and parts might be difficult to find. Keep in mind, once you get 3 or 4 quotes, it might be cheaper to replace rather than repair.

https://husqvarna.custhelp.com/app/answers/detail/a_id/346/~/warranty-how-to-find-model-and-serial-number-on-husqvarna-products%3F Here is a chart

Question edited for name of maker and '(what it is)'. Question moved from Cars and Trucks. See if the videos help. https://www.google.com/search?q=husqvarna+z254+drive+tension+spring ..

I had the same issue, exactly. I changed the cutter blades and it got much better. It is not totally fixed. It gets clogged most when the embroidery has to move around with the same color...which would suggest that it is still not totallly working. I think it might have to do with the cutter arm not retracting enough or not being positioned correctly. I'm still working this, but I hope that it helps you. If you found an answer, please share! Thanks!

I can't find a Husqvarna Viking H Class 500 R. There is a 500E. Make sure that the presser foot is up and the needle is in the highest position. Use the hand wheel to move the needle by turning the wheel towards you. All machines follow a move from right to left, down, up, down threading pattern. Place the spool on the appropriate spool pin and put on the spool pin cap. First guide the thread around the thread guide to the left of the spool pin and then pull it down along the groove. Continue running the thread down the groove and then around the inside of the tab at the bottom. Bring the thread up to the thread take-up lever. Pass the thread through the thread take-up lever from right to left. Insert the thread in the left-most groove and bring it down to the thread guide. Guide the thread into the thread guide above the needle. To use the needle threader, lower the presser foot. Otherwise, push the thread through the eye of the needle from front to back. See the manual if you are using a vertical spool or a double needle. The needle threader can't be used with a size 60 needle or the multi-needle options. For inserting the filled bobbin, raise the needle. Open the bobbin cover plate by pressing the release button to the right while pushing the left corner of the plate. Place the bobbin on the pin of the bobbin case with the bobbin rotating counter-clockwise when the thread is pulled gently. Pull the thread through the slot slightly to the left of the 6 o'clock position (12 hour clock) and then to the left. Gently hold the bobbin with a finger and pull the thread the second slot (near 8 o'clock). Pull out about 6" of thread heading towards the rear of the machine and replace the bobbin cover plate. The manual for the H-Class 500E is available here: https://www.husqvarnaviking.com/en-US/Machines/H-CLASS-500E . The current link to the manual is https://www.husqvarnaviking.com/getattachment/Machines/H-CLASS-500E/HClass_500E_manual_EN_B.pdf.aspx . See page 11 (page 13 of the PDF) for threading the top thread. Page 15 (page 17 of the PDF) has the section on inserting the bobbin. I hope this helps. Cindy Wells

Have you checked the keyway that is molded in to the aluminum flywheel if there's even a little tiny chip and it Will throw timing off enough that it won't fire at the right time I'm not an expert I had similar machine do the same thing didn't look like there was anything wrong with the key way in the flywheel just glancing at it but there was a small chip out of the side very hard to see keyway is very small

Question edited for clarity. There are videos in this link. https://www.google.com/search?q=adjust+the+carburetor+on+a+Husqvarna+525LS+and+Husqvarna+128LDX ..

The answer is here https://www.justanswer.com/small-appliance/8qhl9-sewing-machine-will-not-read-usb-stick-diamond.html https://www.google.com/search?q=Designer+Diamond.+doesn%27t+read+USB ..

Check the spark arrest screen is clear.

"... inspect the muf?er. A blocked screen will cause the machine to overheat..."

Question moved from Cars and Trucks to correct category. I used to ride enduro, mind you, it was 50 years ago. I rode a Huskie 400 Automatic as a tester. Your overheating issue is well know on this bike! https://www.google.com/search?q=husqvarna+enduro+701+overheating ..

It has a history of issues! https://www.google.com/search?q=Husqvarna+yth22v46+goes+in+reverse+when+using+forward+pedal+and+goes+forward+using+reverse+pedal ..

$15 here http://www.vikingmanuals.com/Viking_Service_Manuals.htm https://www.google.com/search?q=husqvarna+optima+630+service+manual ..

Sounds like a bad switch to me. The can and do fall apart inside. Springs, sliding contacts and the parts that make the circuit.

That would be an operator not in seat detected. Check seat switch

Question edited for a lot more clarity! The throttle return spring has broken or come unattached. more here https://www.google.com/search?q=Husqvarna+RZ46i+runs+full+throttle ..

If brang new, take it back for a warranty repair/replacement.

10 for 9 bucks!

Viking 6460 Sewing Machine Parts

https://www.sewingpartsonline.com > viking-6460-sewi... Shop our extensive selection of Husqvarna Viking 6460 parts & accessories! Quick delivery. 90-day returns. ... Bobbins (10 Pack), Viking #4114401.

possible drive belt slipping or transmission skipping

It sounds like it needs professional servicing and timing purely because of the 'clunking'. It shouldn't clunk.https://www.google.com/search?q=Huskylock+905+Serger+thread+D+keeps+breaking..

A parts schematic might help you https://www.partstree.com/models/st-268-ep-961910038-11-husqvarna-27-snow-blower-2013-07/drive-19/ Or you could pause in the videos https://www.google.com/search?q=2011+husqvarna+st+268+ep+tension+belt ..