HTC Audio Players & Recorders - Answered Questions & Fixed Issues
Dear HTC Experts
I recently bought
Hi, For connecting to other devices, press & hold the power button of your bluetooth headset for initiating the discoverable mode. When the led light starts flashing in red color, search for the headset from the phone in which you wanna connect. Open the Bluetooth settings, turn it on and search for new devices and pick from the list and pair the headset. After this, the headset will be auto-connected.RegardsVineeth
10/28/2013 5:54:51 AM •
HTC BH M300...
•
Answered
on Oct 28, 2013
•
142 views
How do i pair up
ok you hold the power key 40 second and you see the power light is stable now you find the device from your phone when you able to find the device you are able to pair the device using 0000 pair key.
1/19/2014 10:28:56 AM •
HTC BH M300...
•
Answered
on Jan 19, 2014
•
1,718 views
My Control 4 AVM-HTC1-B no longer tunes the
Power outage is very likely to kill these systems, your best bet (I'm assuming these are in your area) - would be crestron, they supply at around the same prices and their products are highly reccomended.
Try
http://www.crestron.com/ or failing that you're going to pay through the nose for similar equiment from other higher end dealers.
Wish you the best of luck and happy new year! And invest in a surge protector for 2011 :)
1/8/2011 12:58:47 AM •
HTC Control4...
•
Answered
on Jan 08, 2011
•
397 views
When I put movie in
Home theatre systems are usually made and distributed based on regions. Usually there are about 7 regions and players are usually distributed to each region based on the type of disc which will be distributed in that region.
The disc you have is supposed to be distributed to a different region but has found its way to you. Usually the formats on which the discs are made are usually different from region to region. Although there are methods to change these devices to work with any unit.
Hope this solution has been helpful;?
1/2/2011 9:20:47 PM •
HTC Audio...
•
Answered
on Jan 02, 2011
•
67 views
Battery goes empty after full
Hi,when a battery goes empty after fully charged, means the cell of the battery is weak and can power on the phone for too long.
All you need to do is to replace the battery with another one,charge for about 6 hours before use and every thing will work fine.
10/5/2010 12:18:33 PM •
HTC BH M300...
•
Answered
on Oct 05, 2010
•
355 views
Control4 remote reset sequence
The SR150 and SR250 remotes can be re-imaged. The V2/1 remotes cannot, any problems they have are always battery related. Remove old batteries and wait at least 2 minutes then replace with new batteries. This will reset the remote but you may need a technician to reset the Zigbee network.
1/7/2010 12:03:54 AM •
HTC Control4...
•
Answered
on Jan 07, 2010
•
6,869 views
How do I change to degree mode on my porpo YH-2000
- Power Off: Turn off the device.
- Jumper Configuration: Locate the jumper labeled "S16" on the device. Initially, it should be connected to pins 2 and 3.
- Power On (Alarm+All LEDs Flashing): Turn the device back on. You'll see the alarm LED and all other LEDs flashing.
- Power Off Again: Turn off the device once more.
- Jumper Adjustment: Change the jumper configuration from pins 2 and 3 to pins 1 and 2.
- Finished: Your Porpo YH-2000 is now set to the desired angular unit mode.
If you encounter any issues, you can press the reset switch on the back of the device to reinitialize it.
Openfit Shokz battery replacement?
Question edited for clarity, typo and CAPS.
Question moved from Cars and Trucks category.
Claim on the warranty irrespective of how long you have had them. They charge $180 but they cost them $20 to buy from China. Package them up and send them tracked and ask them to replace the batteries.
How long is the warranty on AfterShokz?
While we hope you never need it, all new Shokz purchased from authorized retailers come with a two-year warranty that begins on your date of purchase.
Jan 11, 2019
https://www.google.com/search?q=Openfit+Shokz+battery+replacement
..
My roadking rk4000 wont charge. I turn it off to charge it but there is no indicator light at all, any suggestions?
Are you using the charging cables that came with it? That is a type C. Are you securely attaching the charging cable? A loose connection would keep the battery from charging. If you had a low battery, you would see a red light. That you have no light at all suggests there is no charge left in the battery. I'm not sure the reset will work with no charge which is why you ought to check the cables first.
But turn it off and then hold down the Multifunction button for 10 seconds to reset it. Then turn it back on and see what happens. If you can, test the charging cable on aother device. If you have another type C charging cable, try it, just to eliminate a bad cable. If these suggestions don't work, you may try the manufacturer's customer support.
Can f2100 remote work on my dishtv box?
The F2100 remote is not explicitly listed as compatible with the AerialBox T2100, I recommend using the remote that came with your AerialBox T2100 for optimal functionality. If you have any specific compatibility concerns, I suggest reaching out to Dish TV customer support for further assistance.
Not finding what you are looking for?