The P6 and P7 connectors you found inside your HP 6000 tower are indeed related to the CD/DVD drive. They are typically used to provide power and data connections to the drive. Here's how you can connect them properly:
1. Power Connection (P6): The P6 connector is usually a 4-pin Molex power connector. It provides power to the CD/DVD drive. Locate a corresponding power socket on the back of the CD/DVD drive. It should have four pins and match the shape of the P6 connector. Connect the P6 connector to the power socket on the drive. Ensure it is securely attached.
2. Data Connection (P7): The P7 connector is usually a 40-pin IDE or SATA data connector, depending on the type of CD/DVD drive installed. Locate the corresponding data socket on the back of the CD/DVD drive. It should have either a 40-pin IDE connector or a smaller SATA connector. Connect the P7 connector to the data socket on the drive. Make sure it is properly aligned and securely connected.
After connecting both the power (P6) and data (P7) connectors, you can close the tower and start the computer. Windows should then detect the CD/DVD drive, and it should appear in the Device Manager. If the drive is still not recognized, there might be additional factors at play, such as driver issues or hardware problems with the drive itself.
If the CD/DVD drive continues to have issues or is not recognized by the system, it may be necessary to troubleshoot further or consider replacing the drive if it is no longer functioning properly.
Please note that the exact connector types and locations may vary depending on the specific model and configuration of your HP 6000 desktop computer. If you have difficulty locating the appropriate connectors or need further assistance, it is recommended to refer to the computer's user manual or contact HP's customer support for precise instructions tailored to your specific model.
Try uninstalling your PDF program, reboot and reinstall the latest version. It may be the way it is parsing the colours, if the Printer Test Page printed okay.
Unplug machine for awhile then plugback. It may reboot..remember its a computer n needs dailyrest. Also any connecting plugs on machine shud b done the same....debris gits on the pins causin bad contact. Make sure fan is workn rite
Likely one of these components has sustained some damage from the impact. The heating element inside the fuser assembly is porcelain and will crack easily. Cooling fan is stuck from damaged or misaligned fin, or the laser scanner assembly isn't spinning up properly. Any of these components can fail and the printer still seems like it's about to print but stops.
Better to have FULL 'make model' and the Service Tag Number, but it appears to be a well documented issue.
If you want to fix the HP laptop not turning on power light blinking issue, you must first check the BIOS battery. Usually, this is located near the motherboard. To remove it, you need to press and hold the power button for about 30 seconds. This should restore the laptop's BIOS.
hp.comhttps://support.hp.com > ish_1997210-1528385-16
52 steps
1.
Turn off the computer.
2.
Disconnect the AC adapter.
3.
Disconnect all nonessential peripheral devices, such as printers, scanners, external hard drives.
It appears to be a known issue
Fix 1: Hard reset your laptop
Remove the power, hard drives, the battery and any attached peripheral devices. Press and hold the power button for 60 seconds and release. Put your battery in and plug the charger. Then don't plug anything else.Nov 20, 2019
Did you remove the sealing tape?
5. Remove the new print cartridge from its packaging, remove the orange cover from the print cartridge, and then pull the orange tab straight out to remove the sealing tape.
6. Squeeze the blue release levers on the print cartridge, holding it with the roller facing you. Lower the cartridge straight down into the carousel until it is firmly in place.
7. If you need to replace another cartridge, close the top cover and the scanner assembly, press ROTATE CAROUSEL, and then repeat steps 4 through 6.
http://www.hp.com/ctg/Manual/c00292207.pdf
Other ideas
https://www.google.com/search?q=Hp+laserjet+2840-yellow+cartridge+flashing
..
To enlarge the print when copying on the HP Envy 4500, you can adjust the zoom or scaling settings in the printer software. Here are the steps to follow:
1. Load the document or photo that you want to copy onto the scanner bed.
2. On the printer control panel, press the Copy button.
3. Use the arrow buttons to navigate to the Zoom or Scaling option and press OK.
4. Use the arrow buttons to select the percentage by which you want to enlarge the print. You may be able to choose from a list of preset options (such as 125%, 150%, or 200%), or you may be able to enter a custom percentage.
5. Press OK to apply the changes and start the copy job.
If you're using the printer software on your computer to control the copy job, you may need to follow slightly different steps depending on your operating system and the version of the software you're using. However, the basic process should be similar. Look for options related to zoom, scaling, or print size, and adjust the settings as needed to achieve the desired level of enlargement.
Raja Ahkter is definitely a AI Bot. There was an answer from him earlier for a Washing machine where here suggested checking the 'Compressor', (thinks it is a fridge) and then a bit further on in the same answer suggested also checking the Inlet and Exhaust valves (thinks it is a car)! I delete his answers, but the bot picks them back up and answers again.
You contact the sender of an answer by clicking Comment under their Answer. They will get a Notification via email and on the site.
It will depend though whether is was an old answer or a new one? Many of our historical Experts have passed away.
As stated, if you wanted an answer from and HP specialist, go to www.justanswer.com You only pay if you are satisfied with the answer but it will come from an HP Engineer.
