My HP Color Laserject CP4025 Error 49.FF03 Device Failure
49.XX.XX
Explanation:
A critical firmware error occurred.
49 errors are unrecoverable exception errors in product firmware. When a 49 error occurs, the user sees a 49.XX.XX message on the control panel (where XX.XX is replaced by a combination of numbers and letters). A 49 error might happen at any time for multiple reasons. Although some types of 49 errors can be caused by hardware failures, it is more common for 49 errors to be caused by printing a specific document or performing some task on the product than it is for a hardware component to be at fault.
Most commonly, 49 errors occur when a product is asked to perform an action that the product firmware is not capable of and might not have been designed to comply with, such as:
· Printing files with unsupported programming commands.
· A unique combination of user environment and user interactions with the product.
· Interfacing with a third-party solution that was not designed to work with the product.
· Specific timing, network traffic, or concurrent processing of jobs.
Each of these interactions could cause the product firmware to initiate an action that the product cannot accomplish. In situations like this, the product might present the error if it has no other option. When these errors occur, the only way to recover is to turn the products power off and back on.
NOTE: LaserJet formatter PCA's are rarely the root cause of 49 service errors. Please do not replace the formatter or Flash unless troubleshooting has identified the formatter as the root cause.
I suggest that you try to upgrade your printer's firmware and then try doing a FULL NVRAM Initialization .
10/21/2023 5:03:49 PM •
HP Office...
•
111 views • 0 helpful votes
How do i fix an hp laserrjet pro m404 dn which keeps jamming in the cartridge area
There could be several reasons for this issue. One of the most common causes is a broken drive on the toner cartridge, especially if you are using third-party toners . You can try removing the cartridge and looking at the right and side to see if there is a small metal shaft with tabs on it. If it is broken, you will need to replace the toner cartridge .
If the issue persists, you can try the following steps:
Turn off the printer and unplug it from the power source.
Open the front door of the printer and remove the toner cartridge.
Check the cartridge area for any jammed paper or debris and remove it.
Reinstall the toner cartridge and close the front door.
Plug the printer back in and turn it on.
If the problem still persists, you may need to contact HP support for further assistance .
11/20/2023 7:25:39 AM •
HP Office...
•
48 views • 0 helpful votes
Not finding what you are looking for?
