HP Logo

HP Popular Questions, Answers, Tips & Manuals

  • 13K Products
  • 550K Answers

How to Clear error code 0XC19a0037 Ink System Failure on HP Photosmart Printers

This fix will work on all HP Photosmart printers that use 4 cartridges or 5 cartridge #564 or #364 ink cartridges:

on Feb 05, 2019 | HP PhotoSmart Office Equipment &...

The news is all bad. The print head has died or has developed enough of an electrical fault that the machine no longer recognizes it. The machine may be saved by replacing the print head - if you can get one from HP as a service part. You would need to contact the HP help desk to find out if you can get one (have the serial number of your machine on hand) and what it would cost. Then throw the machine away and buy something else.

HP Office... | 297 views | 0 helpful votes


HP Officejet 6500A Printer - How to fix General Printer Error

Try this fix if your printer gives you an error code that says "General Printer Error"
Good luck! For All HP Officejet 6500 and 6500A printers:

on Feb 05, 2019 | HP Officejet 6500A Plus Wireless...

How to control PS3 Controller with Android?
  • The very first step is to turn on the Bluetooth on your Android Smartphone. And make sure that the Bluetooth is visible of your Android. I hope you know how to turn on the Bluetooth on your Android.
  • Now is the time to recognize your smartphone in the gaming console of PS3. To do so, go to Settings<<BlueTooth and click on Register. It starts scanning a new Bluetooth device.
  • The gaming console will generate a passcode that you need to enter in your smartphone. Once you enter that passcode, your smartphone will be paired with PlayStation 3 Console.
  • To pair PS3 with Android Device, download and install PS3 Controller App from here.
  • Once you have successfully installed it, open the application.
  • On the PS3 Controller app, click on "Start" as shown in the image below.
  • Grant all the necessary permissions when asked.
  • It will connect PS3 Gaming Console and Smartphone using Bluetooth.
    Also Check: IOS Emulator for Android
Tech Tip: Connect your PS3 VR with a virtual desktop with powerful GPU to experience the thrilling gaming experience and access it remotely from anywhere on any device(PC/Mac/Android/iOS) with reliable desktop hosting service from www.CloudDesktopOnline.com. Visit Apps4Rent to know more about such hosted software products suitable for you.

Final Verdict:

If you have followed all the steps then you can easily control PS3 with Android Device using PS3 Remote Controller App. If you any doubts or problems with this Android PS3 Remote then let me know in the comments area. I will help you "Control PS3 with Android" using "PS3 Remote Control App For Android".

HP Computers &... | 92 views | 1 helpful votes

Verify pump is operating correctly.a.Disconnect pump from power source.b.Disconnect discharge hose from pump.c.Immerse pump in a bucket or tub of water.d.Plug power cord into a grounded115 volt AC power outlet. If pump operates correctly proceed to step #3.

HP Dishwashers | 49 views | 0 helpful votes

Sounds like it's getting clogged or jammed

HP Office... | 44 views | 0 helpful votes

To better determine what is causing it to reboot, first ensure your computer isn't configured to restart on a failure. From windows explorer, you can right-click on "This PC" or "My computer" and select "Properties". From there, there should be an "Advanced" tab, with a section titled "Startup and Recovery". Click on the "Settings" button in that section, to bring up the "Startup and Recovery" settings. There is a "System Failure" section, with an item "Automatically restart". Uncheck that, and click "Ok". The next time you have a failure, you should get a "Blue screen of *****", that has error information. You can google the error code to figure out what is failing. If you still don't see a blue screen of ***** when it fails, it implies an overheating issue. Look for tools to monitor CPU/GPU temperature, like "Speccy", and you can see if either is running too hot. Hope that helps.

HP Computers &... | 112 views | 1 helpful votes

Under the keyboard.

HP Computers &... | 100 views | 0 helpful votes

For Windows OS Factory Reset errors, the easiest way is to reach Windows technical customer service. They provide an instant solution and help for email setup and password related issues.

Read the full solution here -

How to factory reset windows


HP Computers &... | 47 views | 0 helpful votes

i have seen this many times need to replace hard drive and download windows media from windows site and reinstall windows computer will come back to life after
note I would get ssd instead of hard drive

HP Computers &... | 40 views | 0 helpful votes

If your HP printer Orange light Blinking then Remove the cartridge from the printer.
Disconnect the power cord form the rear of printer.
Unplug the Power cord from the Wall Outlet.

HP Office... | 42 views | 0 helpful votes

What do you mean by flash the chip? Are you wanting to format it? If so it's just like formatting any other drive.
If you are talking about updating the software on the drive, first is it not working correctly? If it is, it can be very dangerous to update the software unless you know, exactly, what you are doing. One mistake and the drive will not work, ever, again.
If you are looking to update the software on the drive, check the manufactures website for the software and the instruction.
Good luck

HP Electronics -... | 69 views | 0 helpful votes

Here's the link...

HP Office... | 33 views | 1 helpful votes

This 59 error points to main motor or fuser drive gear motor. Before giving up, take out toner and close the top without the toner in the printer.Next, replace with a used toner or one you have as a back up. A lot of times it points to a motor that gets stalled by the drum that resides in the toner cartridge that is tight to turn. Check this, especially if this occurred after replacing the toner.

HP Office... | 28 views | 0 helpful votes

Switch ON , after switching ON
Press ctrl+Alt+Delete
At right hand side lower portion you will found Shut down, click option appear then click Shift + Restart
Chose options to reset.
That's it.

HP Computers &... | 26 views | 0 helpful votes

Step 1:
disconnect all external devices including battery & AC adapter
Press and hold the power button for 10 seconds to discharge any or all static from the PC.
Step 2:
Connect back the battery & AC adapter
press the windows key + B and at the same time press the power button.
This should clear the BIOS (Incase of BIOS issues or interrupted updates)

HP Computers &... | 51 views | 0 helpful votes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top HP Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers


Level 3 Expert

83951 Answers

Brad Brown

Level 3 Expert

17956 Answers

Are you a HP Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides