House Brand Car Audio & Video - Recent Questions, Troubleshooting & Support

Radio 12v, blue/red, +, radio harness
Radio Ground, black/yellow, -, radio harness
Radio Ignition, orange, +, radio harness
Radio Illumination, lt. green/red, +, radio harness
Factory Amp Turn-on, blue/black, +, radio harness
Power Antenna, N/A,,,
LF Speaker +/-, red - white," +,-", radio harness or amp
RF Speaker +/-, blue - yellow," +,-", radio harness or amp
LR Speaker +/-, purple - pink," +,-", radio harness or amp
RR Speaker +/-, white/blue - black/blue," +,-", radio harness or amp thats for non bose 04

Your code is 9703

===================================
Philips Renault Code Entry
 
Turn on the radio and the display will show 'CODE'
 
Use the steering controls for code entry.
 
Press the [ ¬] button then rotate the thumb wheel for the correct first digit
Press the [ ¬] button then rotate the thumb wheel for the correct second digit
Press the [¬ ] button then rotate the thumb wheel for the correct third digit
Press the [ ¬] button then rotate the thumb wheel for the correct fourth digit
 
If the correct code is now shown on screen,
press and hold the [¬ ] button for up to 10 seconds to store the code
===================================

Hello desbmj1,

It's best to use a vehicle specific wiring harness. That way, you can just match up the wires from your new aftermarket receiver color-for-color.

If you don't want to use a wiring harness, then you need to obtain the wiring color code for your vehicle.

www.modifiedlife.com has the color codes for most vehicles. Click on "Car Stereo Wiring Diagrams" at the top left, scroll down and clink on the make of your vehicle, then find the model and year on the list at the left.

Hope this helps.

i have attached a link with a how-to that has pictures so that you can get a better idea.

1. remove the window/lock switch panel by pulling upward at the front of the switch(held in by clips)careful not to break the tab towards the rear(see pic) unplug and remove
2. remove screw behind that panel
3. remove trim around the door handle, and screw behind that panel.
4. remove 2 screws at the bottom of the door panel
5. then pull straight up and towards you in one motion

http://www.explorerforum.com/forums//showthread.php?t=192049

hope this helps

There should be a setting on the head deck, depending on what model it is. Try fiddling with all the bottons on it. If the balance had never originally been changed maybe you're speaker wires not connected up properly. If it has then you can definately changed it back, look for a setting called "bal" and make sure it's 0.

Call your local GM dealer and ask for the crevice department
Have your car VIN number ready at hand
They shut be able to tell your code by you VIN number
How ever some times they wan to make money and they will tell you
Than you going to have to bring your car over so they can charge you just for that
Good luck.

Hello lagreen98,

Yes, one of the most likely causes of complete failure of the radio would be a blown fuse. There's a fusebox located under the instrument panel to the left of the steering wheel. The radio fuse is number F13, is 7.5A, and color-coded "brown". Here's an image of what a burned fuse and a good fuse would look like. The image is a "yellow" 20A fuse.


Hope this helps. If it does, please rate as "FixYa"!

Hi there,

you should have to red and while cables, they are your speaker cables matey

The radio code is a security feature that's meant to deter theft, and it's unique to each vehicle. If you've lost your code, you'll need to contact a Nissan dealership or service center and provide proof of ownership. They should be able to help you retrieve the code. Please do not attempt to use codes from the internet as incorrect attempts may lock your radio.

How to change language to english for Honda Odyssey 2021 Gathers Radio Player

I have the same radio now with no Bluetooth am trying to get Bluetooth on it too without having to buy another radio. Please help.

First thing to do is check to make sure that the batteries are properly charged.

Second, make sure that you have a clear line-of-site to the IR transmitter. Infrared (IR) works the same way that your TVs remote control works - if the signal is blocked, then you will not hear any sound.

Third, make sure that you are in the rear seat of the vehicle when listening to the sound. The IR transmitter only transmits to the rear seat, so you will not hear any sound if you are sitting in the front seats. This is a common problem that i see.

Lastly, make sure that the heapdhones you purchased are compatible with your 2006 2007 2008 2009 or 2010 Toyota Sienna. Remember that some older models require RF headphones, not IR headphones. I checked http://www.audiovideo2go.com for compatibility before I purchased my headphones. They have a useful listing of all the headphones and models of vehicles they are compatible with.

'make model (what is is)' as first 3 words in all questions. https://www.google.com/search?q=demo+mode+the+code+for+4.91 ..

Unfortunately, no one knows or is telling. Companies rarely state power in RMS because Peak Power is a much more impressive. 1000 watt amp, 200 watts RMS x 2 channels at 8 ohms. Look for a sticker on the unit. https://www.google.com/search?q=Xplore+Amp+5553 ..

As used in 2013 Honda Pilot? https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk01V_jKjIwXe6-iL48YYBgrjQpYLYA%3A1613496601626&ei=GQEsYO3aJZKE5wL38aDoBw&q=gathers+vxm-164vfi+english+manual ..

What is your question? Thank you.

Your code is 1 3 6 3