Hotpoint Washing Machines - Page 9 - Popular Questions, Answers, Tips & Manuals

I would call the local washing Machin repair person for a quote eric

On my machine you just hit the cancel button 2 times to reset.

Most likely a control board failure, you need a service tech to come out.

Call warranty service as trying to fix yourself may void warranty

hi there. go to this link and it should help you out. Can the bearings be replaced on my hotpoint wdf740 Google Search

Timer may be shot.

use multi grip pliers and squeeze the ends of the clip together and pull it back up the hose at the same time Then pull the hose off

It sounds like it is not pumping out or you have a blockage on the outlet pipe .

Bad loading or the rubber is fouling the inner tub.

More than likely something like a sock or other object is blocking the pump inlet.

Sounds like your timer is not working or not receiving power to it.

mean internal frost buildup on some units. let unit sit for awhile.

Could be the plug itself, or door interlock switch, try cutting off plug replacing Interlock cost is around 20GBP.

Running with a restricted water supply probably took out the pump.
The stator requires a steady water supply for cooling and lubrication. Without this accelerated wear between the stator & magnetic poles occurs.
This additional clearance makes the magnetism insufficient to spun the impellor.

Unplug your washer for 10 minutes, consult your users manual while waiting, then plug it back in, Still unresponsive, contact an authorized service tech. I’m happy to assist further over the phone at https://www.6ya.com/expert/david_dc2f9e0a44104720

Most likely a motor control issue or possibly the motor itself

Keely, does it have a lock mechanism the door? If so, most have to be accessed from under the washer and you will need help doing this. Go to youtube, they have several videos for you to see how to do so. DON'T FORGET TO UNPLUG IT!

Perhaps the inlet solenoid that lets water in the machine

The switch inside the door is probably open and not closed.

Either the control or the door lock is bad and probably needs replacing . I would start with the lock.