Hotpoint Ovens - Page 2 - Recent Questions, Troubleshooting & Support

I think I would try removing the door and reinstalling. It may be the door is simply misaligned in the hinge. Easy process, heres a YouTube video describing how to do this.

https://youtu.be/ekZMbEP6ZF0

replace the fuse in the plug

Hello, bob,..... I was trying to help you out here. Maybe this will help some? I was going back to some customers that asked questions in the recent past and even farther back. It appeared that no one answered some of them, So, I thought I would take some of my personal time to see if I can help. Even though this Informational site may not have your exact model or brand, this site will help you a lot. Here is a site link about everything you want to know about ovens and possibly yours, from repair to trouble shooting it. Now go easy on me, I am just trying to help. If it does great if not, I am sorry.

http://home.howstuffworks.com/how-to-repair-an-oven.htm Please if this helped you at all, if you can find the time and in your heart to rate my help and some kind words written would be appreciated for my free help , I would appreciate it. Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive, Appliance, and Electronics. Drop In anytime for my help. Thanks, Mike http://beta.fixya.com/users/mc1bean

Contact manufacturer customer hotline phone# or google search Hotpoint oven UT47X. Marcus

Pressing the "-" button on the control panel will cycle through the 3 or 4 available beep tones / volumes. No need to press any other buttons during or before this process.

Shame Hotpoint didn't see fit to put this in the manual. We dicovered it by mistake!

Sounds like a control board problem. When the display goes out that is usually a dead board.

Is there a black pole sticking out that goes in when you close the door, my Hotpoint freestanding cooker has it on the right hand side, once this is pressed in the fan and heat starts, i had to replace it on my cooker as it went faulty and stopped things working (all I had was the main oven light on, these are usually like a little black box that are situated on the side of the oven just behind the main metal panel on the outside and will normally have 2 pull off spade connectors connected to it. i don't have the same model as you but hopefully this mig help you.

might need to run it through the cycle again. you may have disrupted the timers and if has not reset itself. try this link and see if these answers help you out. Why does my oven light keep blinking after the self cleaning cycle on my...

if the element shorted out and broke apart it can also take out the clock assy. or computer board same thing next time send the full model number off of the oven

No.

That hole is most likely a vent for oven where some heat escapes.

Yes it is only 2 wires . Do you have picture of set up or are you near birmingham? David "The Famous Forry"

Thermal overload has failed. This is a sensor usually with 2-3 wires attached

The problem is most likely that element in the oven that has shorted out. http://www.ebay.co.uk/itm/HOTPOINT-FAN-OVEN-COOKER-ELEMENT-UD47I-UT47X-UY46B-UY46K-UY46W-UY46X-/200842387494?clk_rvr_id=1337783770793&rmvSB=true