Hobart Food Mixers - Recent Questions, Troubleshooting & Support

Because of the very high voltage on the output of the Inverter drive, I do not want to be responsible for your injury or death from you servicing this machine without proper training.

Hobart HL600... | Answered 2 days ago

Sorry so late but the reason you need the kit is because the potentiometer (the knob that selects the time) is no longer part of the timer board.You need the pot,and board.I'm a hobart tech,if any other questions let me know.

Hobart A200... | Answered 2 days ago

If you have 24 VAC to the timer board and still have no display, then you need a new timer board.

Hobart H600... | Answered 2 days ago

Did you solve your problem?I'm a hobart tech but havent been on this site lately.

Hobart H600... | Answered 2 days ago

that fault is a b_gd.there are 10 things that can cause this.1.start sw.momentary contacts not closing. 2.stop sw. contacts open. 3.bowl guard sw. open or malfunction(b_gd)displayed on timer.4.contactor 1con malfunction.5.timerboard malfunction.6.wiring incorrect from sr drive to motor or 1con.7.sr drive malfunction 8.1 con monitor from control drive disconnected from contactor coil9.encoder malfunction 10.motor malfunction. hopefully just your bowl guard switch is no good. hope this helps, dont forget to vote, monomoy

Hobart HL600... | Answered 2 days ago

this mixer came out of a pizza hut in illnois, looks like the manufacture date is june 1994, dont forget to vote, hope this helps, monomoy

Hobart H600... | Answered 2 days ago

Contact Hobart directly to inquire. You probably want a service manual.

Hobart Food... | Answered on Aug 29, 2019

I had a look on google and came up with a service manual. not sure if this has the wiring diagram but the only other thing i can suggest is to contact te manufacturer direct. Go to http://cgi.ebay.com/HOBART-A200-20-QUART-MIXER-SERVICE-PARTS-MANUAL_W0QQitemZ160203114233QQcmdZViewItem
hope this helps.

Hobart A200... | Answered on Jul 08, 2019

you need professional service. The gearboxes are full of grease and not nice to work on. Cogs have shear pins.

Hobart Food... | Answered on Jun 19, 2019

It sounds like either a partly stripped gear or a broken driving pin. If it is one of those options though I'm surprised it has not stopped completely.

Hobart Food... | Answered on Jun 17, 2019

one of two issues:
-either it has started pulling more amps than needed after many years of faithful service, or
-you now have something else plugged into the same circuit that is causing the circuit to trip

in either case, you will need an electrician to inspect and verify with multimeter (unless you know how to do so yourself). try unplugging any new items you may have purchased since just before the issues started

Hobart Food... | Answered on Jun 10, 2019

Not finding what you are looking for?
Hobart Logo

1,187 questions posted

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1355 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides