The aerial antenna inside the tablet is broken.
No indication of make and model or age given, so not possible to advise other than;
If it is a cheap Android 'no name', buy another.
If it is a listed make like Samsung Galaxy take it to any good mall kiosk.
If it is an iPad, take it to the Apple Shop.
All questions need 'make model (what it is) as first 3 words.
Did you download in tablet or computer? Are those movies olayable on computer? If they play on computer it would mean that your tv cannot handle certain codecs or formats and you need to re-convert those movies to format understandable by tv. If they dont play on computer then either file is corrupted or you downloaded "fake" movie
You can't bypass it. You can only Hard Reset it, which scrubs it clean and reloads the operating system with no code. It is a standard Android OS Reset.
If your Digital 2 tablet doesn't have volume buttons, you can still perform a factory reset using the following steps:
Power off your tablet: Hold down the power button until your tablet shuts off completely.
Hold down the power and home button: Once your tablet is powered off, hold down the power button and the home button simultaneously. The home button is the physical button located on the front of your tablet, usually below the screen.
Wait for the recovery screen to appear: Keep holding down the power and home button until the recovery screen appears. This may take a few seconds.
Navigate the recovery menu: Once you see the recovery menu, use the touch screen to navigate the options. Select "Wipe data/factory reset" using the volume buttons on the screen.
Confirm the reset: Use the touch screen to select "Yes - erase all user data" and confirm that you want to perform the factory reset.
Wait for the reset to complete: Once you confirm the reset, your tablet will erase all user data and reset to its original settings. This may take several minutes to complete.
Restart your tablet: Once the reset is complete, your tablet will automatically restart. You'll need to go through the initial setup process again, like you did when you first got the tablet.
Please note that a factory reset will erase all of your data, including apps, contacts, and media. Be sure to back up any important data before performing a factory reset.
If your tablet is not proceeding to the next page after selecting the language during the initial setup, you can try the following troubleshooting steps:
Restart your tablet by holding down the power button until it turns off, and then turn it back on again.
Check if the screen is responsive by tapping on other areas of the screen.
If the screen is unresponsive, try cleaning the screen with a soft cloth or restarting the device.
If the problem persists, you can try resetting the device to factory settings again.
During the initial setup, make sure to connect to a stable Wi-Fi network to ensure a smooth setup process.
If none of these steps resolve the issue, you may need to contact the manufacturer's customer support for further assistance.
If your Smartab 2-in-1 tablet/notebook keyboard is not working and it's new, there are a few things you can try to troubleshoot the issue:
Check the connection: Ensure that the keyboard is properly connected to the tablet/notebook. Try disconnecting and reconnecting it to see if that solves the issue.
Charge the keyboard: If the keyboard has a rechargeable battery, make sure it is fully charged before using it.
Check the Bluetooth settings: If the keyboard is wireless, ensure that it is properly paired with the tablet/notebook. Check the Bluetooth settings to see if it is connected.
Restart the tablet/notebook: Sometimes restarting the device can solve the issue.
Contact customer support: If none of the above solutions work, contact the manufacturer's customer support for assistance. Since it is a new device, it may be under warranty, and they may be able to provide a replacement keyboard if the issue cannot be resolved.
There could be several reasons why your Verizon tablet keeps disconnecting from Wi-Fi and not accepting your password to reconnect. Here are some possible solutions:
Restart your tablet and your Wi-Fi router: Sometimes, simply restarting your tablet and router can help resolve connectivity issues.
Check your Wi-Fi signal strength: Weak Wi-Fi signal strength can cause frequent disconnections. Move closer to the router or try to improve the signal strength by repositioning the router or using a Wi-Fi signal booster.
Check your Wi-Fi network settings: Check if your Wi-Fi network settings match those of your router. Make sure you have the correct security settings and password. Try to forget the network and then reconnect and re-enter your password.
Clear your tablet's cache: Clearing your tablet's cache can sometimes help with connectivity issues. You can do this by going to Settings > Storage > Cached data > Clear cached data.
Check for software updates: Make sure that your tablet is running the latest software updates. Check for updates in Settings > System updates.
Factory reset: As a last resort, you can try doing a factory reset on your tablet. This will erase all data on the tablet, so make sure to back up any important files before doing this. Go to Settings > Backup & reset > Factory data reset.
If none of these solutions work, you may want to contact Verizon customer support for further assistance.
If the Time Warner Spectrum app is not allowing you to toggle between your two DVR devices, you may need to check a few things:
Make sure both DVR devices are connected to your home network and are turned on.
Check that both DVR devices are authorized for remote access through the Time Warner Spectrum app. You may need to contact your service provider to ensure this is enabled.
Ensure that both DVR devices are associated with the same Spectrum account. If not, you may need to add the missing DVR to your account.
If the above steps do not resolve the issue, you can try uninstalling and reinstalling the Time Warner Spectrum app on your iPhone and iPad. Alternatively, you can contact Spectrum customer service for further assistance with the app.
To stop your RCA Viking tablet from saving recent windows across boots, you can try the following steps:
Go to "Settings" and select "Developer options".
Scroll down to the "Apps" section and select "Don't keep activities".
This option prevents the device from saving recent activities, so they won't appear when you reboot your tablet.
Alternatively, you can try using a "one tap closes all" button app from the Google Play Store. Some popular options include "Task Manager" and "Advanced Task Manager". These apps allow you to close all open apps with one tap, which can help to prevent recent windows from being saved across boots.
To unlock the bootloader on your Lenovo Tab3 7 Essential (TB3-710I) tablet, you need to follow these steps:
Note: Unlocking the bootloader will erase all data on your device. Make sure to backup your important data before proceeding.
Enable Developer Options on your device. To do this, go to Settings > About tablet > tap the Build number 7 times.
Enable USB Debugging. To do this, go to Settings > Developer options > enable USB debugging.
Download and install the ADB and Fastboot tools on your computer.
Connect your tablet to your computer using a USB cable.
Open a command prompt window on your computer.
In the command prompt window, type the following command and press Enter: adb reboot bootloader, This will reboot your tablet into the bootloader mode.
Next, type the following command and press Enter: fastboot oem unlock, This will unlock the bootloader on your tablet.
Once the process is complete, reboot your tablet by typing the following command and pressing Enter: fastboot reboot. That's it! Your Lenovo Tab3 7 Essential tablet's bootloader is now unlocked.
If you forgot the passcode to unlock your Prestige Elite 8QI tablet, you can try the following methods:
Use Google account: If your tablet is linked to a Google account, you can try to unlock it using the associated Google account credentials. On the lock screen, tap "Forgot Pattern" or "Forgot Password" and follow the instructions to enter your Google account username and password.
Factory reset: If the above method doesn't work, you can perform a factory reset on your tablet to remove the passcode. Please note that this will erase all data on your tablet, so make sure to back up your files before proceeding.
To factory reset your Prestige Elite 8QI tablet, follow these steps:
Power off your tablet.
Press and hold the Volume Up button and the Power button at the same time until the logo screen appears.
Release the Power button but continue holding the Volume Up button until the Android System Recovery menu appears.
Use the Volume buttons to navigate to "Wipe data/factory reset" and press the Power button to select it.
Use the Volume buttons to navigate to "Yes -- delete all user data" and press the Power button to confirm.
Once the reset process is complete, use the Volume buttons to navigate to "Reboot system now" and press the Power button to restart your tablet.
Your Prestige Elite 8QI tablet should now be unlocked and ready to use.
I'm sorry, I'm not sure what you mean by "the cleaning hack prp". Could you please provide more information or clarify your question so I can assist you better?
To type the "and" symbol "&" on your HKC notepad, you can try pressing the "Shift" key and the number "7" key simultaneously.
If this doesn't work, you can try using the on-screen keyboard. To access the on-screen keyboard in Windows 10, click on the Windows icon in the bottom left corner of the screen, then select "Settings" > "Ease of Access" > "Keyboard" and turn on the toggle for "On-Screen Keyboard". Once the on-screen keyboard appears, you can use your mouse or touchpad to click on the "&" symbol.
If you're still having trouble, you can try changing the language and keyboard settings on your device. To do this, go to "Settings" > "Time & Language" > "Language" and choose the language you want to use. Then go to "Region & language" and select the appropriate keyboard layout for that language. Once you have made these changes, try typing the "&" symbol again using the methods mentioned above.
