Hitachi Logo

Hitachi Answered Questions & Fixed Issues

Do you work here? Claim your company

  • 2K Products
  • 90K Answers
  • 3M Views

Go into settings make sure audio on HD

Hitachi... | Answered on Mar 14, 2019 | 30 views


we have no idea what you need to do .

Hitachi... | Answered on Mar 07, 2019 | 22 views


If your Hitachi is not Amazon fire TV based or Android TV based then there probably isn't a huge app store. For $39 get an Amazon fire TV stick it will solve your app issue

Hitachi... | Answered on Mar 06, 2019 | 16 views


Do you have a WiFi dongle connected to the TV?
If so, it would appear it has a bad connection and needs to be reseated (unplug->plug back in).

If that does not fix the issue, the dongle may be faulty.

Hitachi... | Answered on Mar 04, 2019 | 169 views


PERHAPS IF YOU GOOGLE THE MAKE OF TV AND REMOTE CODE LIST YOU WILL FIND JOY, PEACE AND HAPPINESS

Hitachi... | Answered on Feb 23, 2019 | 15 views


Easy to remove the cylinder and piston/driver. Remove four head bolts and lightly tap head to release gasket. Push out driver by inserting rod thru nose then remove spring retainer holding the cylinder in place.. With retainer removed the cylinder should pop out. Sometimes the retainer will cause a bur to form on the body of the mailer making it s bit more difficult to remove. Good luck

Hitachi NR65AK... | Answered on Feb 21, 2019 | 87 views


There are many possibilities. contaminated fuel, wrong fuel oil mixture. air leak in fuel line, carburetor contaminated, or needs adjustment, choke problems, throttle problems. Try a small engine mechanic.

Hitachi Garden | Answered on Feb 14, 2019 | 42 views


Well Im going through the same thing and no one can seem to figure out what is going on. Ive tried all sorts of disc including a DVD-RAM Video 60 and Im still getting the same Error #2881 Code.

Hitachi... | Answered on Feb 13, 2019 | 3,467 views


Download the service manual and read it. Regards,

Serge.

Hitachi Audio... | Answered on Feb 12, 2019 | 21 views


I've had that happen before and what I found was one of the Staples or nails had misfired and wedged before leaving the gun. read the manual on how to get to it for that particular model and also it might be a good idea to adjust your pressure accordingly to keep it from happening again. If the force isn't set proper then a nail could Jam , block the mouth and not allow any other nails to exit. It's very easy to do and not that hard to fix once you've done it at least once. Good luck.

Hitachi Tools &... | Answered on Feb 11, 2019 | 45 views


Hi, two things.. Either your remote needs new batteries, or you need to switch off your tele and allow it to reboot for a few minutes before switching it back on, I hope this helps

Hitachi 42HDS69... | Answered on Feb 09, 2019 | 797 views


The number one issue is bad fuel - even if you just purchased it, turn the cell over and check the date stamped on the bottom (often stores don't rotate their stock)
If the fan starts when the nose is depressed but there is no spark then I would investigate the spark wire (make sure there are no nicks or cuts that may short to ground) and the ESU (Electronic Spark Unit).

Hitachi Tools &... | Answered on Feb 02, 2019 | 126 views

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Hitachi Experts

John Trevino

Level 3 Expert

1407 Answers

The Knight
The Knight

Level 3 Expert

76016 Answers

Marvin
Marvin

Level 3 Expert

84027 Answers

Are you a Hitachi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...