My Hitachi C10FS compound miter saw runs very unsteady. Power cuts in and out constantly. I just changed the switch and installed new brushes I
If your Hitachi C10FS compound miter saw is running unsteadily and the power cuts in and out constantly even after installing a new switch and brushes, there may be a few possible reasons for this issue:
Loose or damaged connections: Check all the electrical connections in the saw to ensure that they are properly connected and not damaged. Loose or damaged connections can cause intermittent power cuts.
Faulty power cord: The power cord could be damaged or have a loose connection, which can cause the power to cut in and out. Inspect the power cord carefully, and if necessary, replace it with a new one.
Faulty motor: If the motor is faulty or damaged, it can cause the power to cut in and out. You may need to have the motor repaired or replaced.
Electrical interference: If the saw is being used in an environment with high levels of electrical interference, this can cause the power to cut in and out. Try moving the saw to a different location to see if this resolves the issue.
If you have checked all of these potential issues and the problem persists, it may be best to take your saw to a professional for further diagnosis and repair.
3/11/2023 9:37:43 PM •
Hitachi Saws
•
117 views • 0 helpful votes
Hitachi tv black screen ?
but nothing else
If your Hitachi television has sound but a black screen, it is likely that either the bulb or the inverter has gone bad. The inverter is a part of the backlight system. If the inverter is not functioning, the backlight will not work and the television will be dark. You should check to see if the bulb needs to be replaced first. If the bulb is working and the inverter doesn't turn on, then you may need to have a technician take a look at the television.
1/6/2023 2:11:14 PM •
Hitachi...
•
233 views • 0 helpful votes
MESin basuh Hitachi sf-105s saya tidak bisa hidup.saya sudah menukar pcb board control dengan yang baru..tapi mesin masih tidak boleh hidup
Jika mesin basuh Hitachi SF-105S Anda masih tidak dapat menyala setelah Anda mengganti pcb board control yang baru, maka ada kemungkinan bahwa masalahnya terletak pada pcb power board atau bagian lain dari mesin. Untuk menentukan apa yang perlu diganti, ada beberapa langkah yang dapat Anda lakukan:
- Periksa kabel daya dan sambungannya untuk memastikan tidak ada kerusakan atau kelonggaran.
- Periksa bagian lain dari mesin, seperti switch atau saklar, untuk memastikan tidak ada yang rusak atau tidak berfungsi dengan baik.
- Periksa pcb power board untuk mencari tanda-tanda kerusakan, seperti komponen yang terbakar atau terkelupas.
Hello, my Hitachi VM-H675LA is having some problems.
Hi,
Please use the yellow pages website to find a camera shop that can help fix your camera. If that does not work, you can take it to your local Geeksquad/Bestbuy and they can work on the camera for you. Otherwise, you might also call Hitachi directly to ask them about the nearest repair shop that you could send the camera to.
Thank you.
Can't highlight or select digital channels to autoscan on hitachi 51f59a
It sounds like you're experiencing an issue with your Hitachi 51F59A TV not allowing you to select or highlight digital channels for autoscan. Here are a few things you can try to resolve the issue:
- Check the TV's settings: Make sure the TV is set to the correct input (such as "TV" or "antenna") and that the channel search or autoscan feature is turned on. Consult the TV's manual or the on-screen menu for instructions on how to access these settings.
- Check the TV's connection: Make sure the TV is properly connected to a digital antenna or cable box. Also, check that the cables are securely connected and not damaged.
- Check for a firmware update: Sometimes a firmware update can resolve issues like this. Check the TV's manual or the manufacturer's website for instructions on how to check for and install firmware updates.
- Try a factory reset: If the above steps don't work, you can try performing a factory reset on the TV. This will restore the TV to its original settings and may resolve any issues with the channel search or autoscan feature. Consult the TV's manual or the on-screen menu for instructions on how to perform a factory reset.
- Check for a hardware issue: If none of the above solutions work, the issue could be caused by a hardware problem with the TV. In this case, you may need to contact the manufacturer or a repair professional to have the TV serviced.
1/17/2023 8:00:16 PM •
Hitachi...
•
35 views • 0 helpful votes
Hitachi 11 ton ductable 07 error code
Hi,
there might be an error in your refrigerant levels or temperature that needs to be corrected. If you add more refrigerant gas, then this should remove the error.
Thank you.
Not finding what you are looking for?