Hitachi Office Equipment & Supplies - Page 8 - Recent Questions, Troubleshooting & Support

1,Check the fans ,whether the fan is running,when you turn on the projector 2,if the fans run, then ,check the lamp or lamp ballast We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. any questions, feel free to contact me have a nice day! Jerry Lampdeng Limited

1,Check the fans ,whether the fan is running,when you turn on the projector 2,if the fans run, then ,check the lamp or lamp ballast We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. any questions, feel free to contact me have a nice day! Jerry Lampdeng Limited

you need a new Original lamp We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. any questions, feel free to contact me have a nice day! Jerry Lampdeng Limited

Many LED TVs and other electronics have bad capacitors on their power supply boards. You can visually inspect them by opening the TV and looking for capacitors with bulging tops. If you see any, replace them all in the power board section. This should fix the problem. Check to see if your TV is still under warranty first though.

you need a new lamp for your projector. USD80 Have a good day! We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. Jerry Lampdeng Limited Mobile: 0086-13178867858 Wechat ID: 008613178867858 Whatapp ID: 008613178867858 Skype: [email protected] http://www.lampdeng.com any questions, feel free to contact me have a nice day! Jerry Lampdeng Limited Email/Skype: [email protected]

Have you tried replacing the cable ?

On the bottom of the projector should be screws recessed about 3 inches down. There will also be some screws that are visible and some inside of the lamp compartment.

Is it a DLP or LCD projector? Check your manual or provide the exact model number. Thank you. -GWOOD

This usually means there's a loose physical connection somewhere. Check all the cables attached to the outside of the projector. For example, any HDMI cables, USB cables, Computer Monitor cable, etc. -GWOOD

there is a door close switch in the lamp compartment >>>

Have you tried cleaning the lens on the projector? Dirty optics can cause problems with proper light refraction. Hope this helps.