Hitachi Health & Beauty - Answered Questions & Fixed Issues
What do I do if my Hitachi Magic Wand appears to be burnt out?
The drive spring gets twisted when bearing in the vibrating head seizes due to moisture. Spray WD40 on the seized bearing and reinforce the spring drive with a pickup stick or chopstick down the center.
Any rod that fits snugly inside the drive spring will do.
(credit to YouTube commenter oo ee)
9/4/2022 12:57:19 PM •
Hitachi Magic...
•
Answered
on Sep 04, 2022
•
2,975 views
Sounds like its working, but nothing happens
I had the same problem with mine, it's due to the fact that the smaller spring has become un-lodged from the ******** itself.
You will need:
1. Roll of electrical tape.
2. Utility Knife
3. A small slot head screw driver OR a pair of needle nose pliers.
The solution is to unscrew the silver ring so that is can be moved up
and down. Now, you need to use a utility knife and cut the blue rubber
off of the spring. Once you have the blue rubber but off you can see a
large spring with another smaller spring inside. Push the head of the
******** till the larger spring's coils are an 1/8 to 1/4 of an inch
apart. Next take either the small slot head screw driver or a pair of
needle nose and jam the smaller spring back into the hole in the center
of the white plastic piece inside of the larger ring. Next plug it in
to make sure the vibration is working, reattach the silver piece and
tape the larger spring with electric tape.
3/7/2022 4:56:19 PM •
Hitachi Magic...
•
Answered
on Mar 07, 2022
•
12,278 views
The small spring inside my
Super easy fix. The drive spring gets twisted when bearing in vibrating head seizes due to moisture. Spray wd40 on the seized bearing and reinforce the spring drive with a pickup stick down the center. Happy wife happy life.
12/1/2022 8:07:59 PM •
Hitachi Magic...
•
Answered
on Dec 01, 2022
•
6,529 views
Can the Magic Wand Rechargeable Massager be
If your wand is N American then "don't do it" 220 through a 110/120 will fry all the magic out of it. You could get a step down transformer 220 to 110. Plug that into the 220 socket and plug your magic wand charger into that.
The cost would not be worth it though ... buy some more magic that is 220. be happy ... not sorry :-)
5/17/2017 11:10:41 AM •
Hitachi...
•
Answered
on May 17, 2017
•
1,447 views
How to use it PROPERLY
There should have been a small manual that came with it detailing how to use it. If that does not work google model followed by manual
12/19/2014 7:53:50 PM •
Hitachi...
•
Answered
on Dec 19, 2014
•
148 views
I have a hitachi 1500
A regular rechargeable AA. Even the best high quality type. The key point will be a metal piece attached already for soldering by yourself.
9/16/2012 2:26:23 AM •
Hitachi...
•
Answered
on Sep 16, 2012
•
385 views
I fixed my hitachi magic
rotate the head/neck part, one of the sides is not aligned with the notches in the bace of the neck. rotate it to fit right then you should be able to fit it on easily
8/11/2012 12:45:58 AM •
Hitachi Magic...
•
Answered
on Aug 11, 2012
•
3,724 views
It seems to have power
The small sping has come out of the shaft from the motor.If you open the unit you will see that the motor has a little impeller and a shaft with a slot in it. The little spring inside of the massager head is suppose to ride inside of that motor shaft with the little tab on the spring lining up in the slot. It's really flimsy and after I fixed mine it fell out again after 5 minutes of use. It needed a stiffer spring or a different way of engaging the motor shaft. I'm still working on this...
8/14/2011 10:08:22 PM •
Hitachi Magic...
•
Answered
on Aug 14, 2011
•
3,090 views
I need the address of
Theer is no service center in Hyderabad but you can get in touch with the service center in Banglore. Tel No 080-41461460/61/2
Plz give me information of
Unless this is available in stores around Mumbai and New Delhi. check out on the Hitachi support site in India.
9/13/2010 11:37:52 AM •
Hitachi...
•
Answered
on Sep 13, 2010
•
192 views
Recently I bought new Hitachi shaver from Japan.
i had a similar problem -- the red charging light would go on, but it seemed much less powerful, and sometimes only worked from certain angles.
i opened up the shaver (unscrew the two screws on the bottom of the back, take the blade cover off and unscrew the two top screws) and looked at the battery. the metal connector to the top of the battery wasn't sticking up straight! i just bent it back in place and it works great again.
hope this helps someone else out there on the internet.
4/18/2009 2:14:05 AM •
Hitachi...
•
Answered
on Apr 18, 2009
•
594 views
Not finding what you are looking for?