Hitachi Computers & Internet - Answered Questions & Fixed Issues

Same as any other 3.5" drive.

Master, slave or cable select.

Found this,,,,, https://www.justanswer.co.uk/consumer-electronics/c5uh2-hitachi-xl500-won-t-connect-hear-running-no-light.html hope it helps.

In effect the reading head is almost for sure damaged and there is no easy DIY way to recovery data at home.
If the content is really important you can send it to a company who does data recovery. Service is expensive and probably it is going to cost over $1000, furthermore they do not guarantee success.
This company does hard disk data recovery
Alternatively you can ask to a local repair shop to take a chance , get an Hard disk of same model and replace the disk. I warn you that chance of success working in this last way are very scarce and there is good possibilities that you lose your data forever

regards

The password is your responsibility. If you forgot that's a bad mistake, or if it's belongs to someone else ask them.

use this? it can backup anything. https://www.2brightsparks.com/download-syncbackfree.html

You will have to use the HDMI port on the mac. provided you have a HDMI input in the projector

BENJAMIN, Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM

buried in endless spam are you. does it fail on 2nd PC???????????????????????????? but yes, I am the MVP of external HDD< I build my own. Have over 5 here for Backups . lots of causes, for sure bad drive, or missing drivers.. bad HW hardware or BAD software SW. Missing 12vdc 2amp power pack>, lost or using wrong one. when pack above does the HDD spin? usb connected to PC. NO PC stated, NO OS stated, windows/chrome/Linux/android? its at lease 10 years old , see posts back that far. not good old HDD,this old. sold during W7 era. 2009. The drive has 3.5" HDD that needs lots of power (Amps) to start up that big motor inside, and is first thing to learn . 2amps it needs, ok? so if pack is missing it will never startup on any USB port, not rated for 20x standard USB load factors. some laptops only do 0.1amps (100mA) and are useless to startup any hdd motor of any kind. see why here. and see a better extremal solution cheap.! $10 http://www.pcdied.com/external-hdd.html

Tried googling for the answer but couldn't find it. Try calling an it support company, I'm sure they'll help you out for free. Perhaps you can try https://www.computersinthecity.co.uk/, they have been helpful to me in the past.

No. http://www.hitachidigitalmedia.com/en-gb/discontinued-products/plasma-tvs/42-106cm/42pd7200

Hi, What is the router/modem model number? Have you tried a different cable? Have you gone into the menu, networking and setup ?

Your motherboard MUST have a SATA 3.0 port. It is usually blue or look closely on the motherboard to see where the 3.0 port is located. If your motherboard doesn't have a 3.0 port your hard drive won't be any faster than a normal hard drive.

try downlolading the driver compatible with win 10 os

Try to right click the listing. you should get a dropdown where you can repair of reinstall the drivers

Maybe this will work for you. https://ibm-hitachi-drive-fitness-test.en.softonic.com/

Sounds like maybe the hard drive is starting to fail (very common in a 15 yr. old laptop). See/get a new one here:https://www.ebay.com/sch/i.html?_odkw=emachine+8230+power+supply&LH_PrefLoc=1&_sop=15&_armrs=1&_dmd=1&LH_BIN=1&_osacat=0&_ipg=100&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.XHitachi+DK23EA-30.TRS0&_nkw=Hitachi+DK23EA-30&_sacat=0You should try and locate the support page for your Dell at Dell.com, because if you try to reinstall XP on a new hard drive, most likely many drivers will be missing, and you would have to get them from the Dell support page.But installing XP in 2018 would leave you without hundreds of updates, as Microsoft has not supported XP since April 2014. They have not supported Vista since April 2017. So I would recommend upgrading to at least Windows 7, as Microsoft will probably support it until 2020.I just installed Windows 7 on an old HP Celeron (Celeron processor is like one notch better than a Pentium 4). It works pretty well - turned off all the Win7 Aero junk to make it run a little faster. I can even watch YouTube on it and stuff! lol.Good luck.

purchase a Roku box

Creo que ese laptop no supporta SATA para XP, y se puede tratar hacer lo con un cambio en BIOS. Prende el laptop, y empuja "F2" inmediatamente cuando aparece el Dell logo. En el setup menu en BIOS empuja "SATA native mode" para tenerlo apagado. Inserta el Windows XP CD en el CD ROM drive, y apagar y apagar el lapto.

http://www.smartphoneforums.com/forums/hitachi-g1000/26298-my-g1000-wont-turn.html

Running under the assumption that the CD is actually working, have you checked the BIOS settings to indicate that you want the CD to be the first boot device? Alternatively, some if not most systems will accept an F12 during boot up to query the user where to boot from.