Haier Washing Machines - Page 6 - Recent Questions, Troubleshooting & Support

Level the washer ..Using a level and the adjustable legs.

What is the Warranty on machine? If it is 2 year warranty, then get on to them and complain, they will replace the part, or Machine. But Move Quickly as time maybe running out. But if it's under 2 Year, your in trouble I'm afraid.

unless the machine has a programmable board , I doubt it talk with the Haier service people and ask if there is a programmable board or what you is what you get

The flood protection device is activated. No known DYI fixes.

No but in saying that what would be the point of starting it with no washing in it?

It won't spin until all the water has drained. Fix the drain problem first. May be a blockage in the drain pump or if no blockage then drain pump may be faulty.

have u checked inside for loose fan belt? go to link and look for user/service manual ManualsLib Makes it easy to find manuals online

Hi, if you turn off water to machine, remove flexable feed pipe to it and look into inlet hole, you should see a filter, this should pull out, maybe with plyers carefully, if blocked, clean with bleach, or descaler, ours (on a bosh machine, is in the actual tap on the wall, most odd that.) & replace. If this is the cause, I would do it maybe every 6 months or yearly, depends on age of machine. Hope this helps.

ihe clutch is not grabing in1 needs replacing clutch assembly.

www.haieramerica.com

Check your model # on Haier website for a manual download

1) Make sure wash cycle is 100% finished (sometimes dryer will start before - usu on synthetic cycle & allows water to continue flowing in)

2) Manually start the dry cycle after you ensure wash cycle is finished and push in the wash cycle button.

Hope that helps! If not, you may need a new control module (I did - hope you don't!)