GMC Washing Machines - Page 9 - Popular Questions, Answers, Tips & Manuals
The Kelvinator top loader washing machine is showing an LE error code
your washer is locked. Sometimes this may simply be due to a wash load that was too heavy. But there could be other reasons, such as a failed rotor positions sensor, a broken motor, or damaged motor wires. Try unloading some of the washing, then reset the washer by pulling out the electrical plug and plugging it back in. Because there can be multiple causes for the problem, you have to check each one. You might include a model number for your appliance when posting to help narrow the possible answers. Here is a basic guide:
https://www.funktionalhome.com/kenmore-washer-le-code/
Do you have the twin over full with stepa on left and drawers on right
What!?!?
We are FIXYA dot com, we have nothing but information on how to FIX stuff! We are not who you think we are. I am guessing you are South African as they have no idea where they are posting and no one in the western world uses twin tub washing machines.
Aha, scrub most of that, you posted to Washing Machines category. A twin BED over a full BED, except where I am from they are called 'single beds' unless there are two of them side by side and then it is a twin. Two beds over each other are called bunk beds.
Wayfair for $1,500! Double bed on the bottom, a single bed on top and steps on the left. The steps are the drawers. We don't supply anything, buy direct.
https://www.google.com/search?q=twin+over+full+with+stepa+on+left+and+drawers+on+right
..
Lamona HJA8513 Washing Machine. What are the dimensions and capacity of the lamona hja8513 please?
Question edited for clarity.
Question moved from Refrigerators Category.
It is a virtually unknown make, be sure you can get service and parts where you live.
Capacity of dry laundry for washing 6 KG
?
Water pressure 0,05 รท 0,8 MPa
?
Cold fill only
?
Spin speed Measurements 1200 r.p.m.
?
Width 60 cm
?
Depth 54 cm
?
Height 82 cm
NB: For specifications regarding electrical data, see the data panel on the front of the washing machine (porthole area).
..
Wascator w75 doesn't drain on last rinse cycle
Gavin,i need you to check the drain hose if there is any obstruction or clog or it may be bent .clean it out .In addition,try to check the pump if it faulty. Make sure that the drain hose is correctly placed in terms of its height.
I put a linen load and it said sud after a few minutes.
SUD is for 'Suds'. You put the wrong detergent in, or you used too much.
Disconnect from mains power for 30 minutes to reset. Then run a load with no detergent.
Full make and model is useful in questions like this please.
He 4.6 cu. Ft. Washer with a material coming up from under neath the agitator
If you're noticing material coming up from underneath the agitator in your HE 4.6 cu. ft. washer, there could be a few reasons for this issue. It's important to address the problem to ensure proper functioning of the washing machine. Here are some steps you can take to troubleshoot and potentially resolve the issue:
1. **Check for Loose Items:** Sometimes, small items like socks or undergarments can get caught under the agitator during the wash cycle. This can cause them to be pushed up and visible. Carefully remove the agitator and check for any foreign objects underneath.
2. **Inspect Agitator Components:** Some washing machines have removable agitator components, such as a fabric softener dispenser or a cap covering the center of the agitator. Check if any of these components are loose or damaged, causing material to come up from underneath.
3. **Agitator Dogs or Cogs:** Some agitators have agitator dogs or cogs that help move the agitator in different directions during the wash cycle. If these dogs are worn out or damaged, they might not grip the agitator properly, leading to material coming up from underneath. Replace the agitator dogs if necessary.
4. **Excessive Vibration:** If the washing machine is experiencing excessive vibration during the spin cycle, it could cause material to be pushed up from underneath the agitator. Check if the machine is level and properly balanced.
5. **Worn Agitator Splines:** The connection between the agitator and the agitator shaft might have worn splines, causing the agitator to move unevenly and allow material to come up from underneath. In this case, you might need to replace the agitator or the agitator assembly.
6. **Inspect the Tub Seal:** Check the tub seal, which is located between the agitator and the inner tub. If the seal is damaged or worn, it could allow water and debris to enter the space underneath the agitator.
7. **Professional Inspection:** If you're unable to determine the cause of the material coming up from under the agitator, or if the issue persists after troubleshooting, it's recommended to contact a professional appliance technician. They can perform a thorough inspection and provide a proper diagnosis.
Remember, working with washing machine components requires caution and sometimes specialized tools. If you're unsure about any aspect of troubleshooting or repair, it's best to seek professional assistance to avoid causing further damage or compromising safety.
The water wont shut off when filled
The water level sensor has failed on your mystery washing machine, or the level pipe to it has come off or split.
All questions need 'make model (what it is)' as first 3 words please.
I am not able to get the code for the last machine
There is no 'last machine'.
We are Fixya dot com, perhaps you think you are addressing somewhere else because you post makes no sense and has no context. This is your first post here.
https://www.fixya.com/users/roger-loflin
All Questions need 'make model (what it is)' as first 3 words. Then you have over 10,000 categories to choose from. You posted to 'Washing Machines'. Each make has a generic category and many have model, or series as well, Whirlpool Elite or Duo for example..
Not finding what you are looking for?