GMC Washing Machines - Popular Questions, Answers, Tips & Manuals


More info required. Is it not draining. Is it overflowing? Here's a good tip most washer machine manufacturers technician manuals are free online from 1 site. I used it before and was very happy with the troubleshoot sections.

Washing Machines | 1,191 views | 0 helpful votes


Is this on a washing machine? Sounds like it’s more of a control problem.

Washing Machines | 1,294 views | 1 helpful votes


ASK YOURSELF THIS QUESTION CAN I POSSIBLY FIX THIS MYSELF . ANSWER NO EVEN THO I KNOW THE MAKE OF IT . I COULD CALL A REPAIR SERVICE , OR I COULD POST A QUESTION HERE BUT SINCE I LEFT OUT THE 1ST MOST IMPORTANT PART LIKE THE (MAKE) THEY WILL NEVER KNOW , SO PERHAPS I (YOU) SHOULD ASK Google WHAT THE ERROR CODE MEANS . SMILE AND HAVE A GOOD DAY

Washing Machines | 1,098 views | 0 helpful votes


Soak it with wd 40 and let it set for a while

Washing Machines | 1,196 views | 0 helpful votes


Verify that BOTH water hoses are hooked up correctly and turned on. What happens is the hoses get hooked up backwards, sometimes... then dad gets a big hot water bill and turns off the hot water (which is hooked up to the cold inlet)...When the machine needs cold water, it turns on that water valve and no water flow because hose source is turned off.

Washing Machines | 417 views | 1 helpful votes


DEFECTIVE WATER LEVEL SENSOR SOUNDS LIKE

Washing Machines | 364 views | 1 helpful votes


What manufacturer and model washer is it, please?

Washing Machines | 191 views | 1 helpful votes


Is the llid closed?
this happens on every cycle?
Can you visually see the switch?
If you stick a pen cap to much the switch in does it start washing?
do you give it time(I have to ask)?
Unplug and the plug it back in?
Were there any sounds smells or damage before this happen?
give you model number and pictures and anything you have to help
good luck
https://www.6ya.com/mr.mike

Washing Machines | 1,414 views | 0 helpful votes


Does the receptacle it's plugged into have power?

Washing Machines | 1,575 views | 0 helpful votes


Take it apart and on the back and you will find a magnet pull the magnet apart. And cover it with engine oil then put it back in and it should work i did this with about 88 wash machines

Washing Machines | 305 views | 1 helpful votes


RUN IT WITH JUST WATER AND BLEACH ONCE IN AWHILE NO CLOTHES

Washing Machines | 223 views | 1 helpful votes


bad door switch or washer door is not being shut fully

Washing Machines | 649 views | 0 helpful votes


if you dont have warrenty to replace the unit you can purchase a new unit here>>>www.discountbargainprices.com

Washing Machines | 193 views | 1 helpful votes


Make sure that the clothes in the washing machine are of similar fabrics ( cotton: polyester: wool, etc) do not mix cotton with polyester because cotton will absorb more water that Polyester during the wash cycle, and put the machine out of balance during the spin cycle.
If this does not work, it could be that one of the tub suspension damper units is worn, and not doing its job of stabilizing the load.
If the machine is making a lot of unusual banging noises, during spin, it could be that one of the counter balance weights that are attached to the tub, have become loose or detached, which will also give the same effect as an out of balance load.
I hope this helps?

Washing Machines | 1,298 views | 0 helpful votes

Not finding what you are looking for?
GMC Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top GMC Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1479 Answers

Marvin
Marvin

Level 3 Expert

84540 Answers

Brad Brown

Level 3 Expert

18031 Answers

Are you a GMC Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...