GMC Logo

GMC Popular Questions, Answers, Tips & Manuals

Do you work here? Claim your company

  • 709 Products
  • 189K Answers
  • 4M Views

No oil, insufficient oil, oil line fractured, oil pump no longer working. Sorry I could carry on but if it were me, I would investigate the pressure loss or is it a sensor ..... ???.

GMC Cars &... | 56 views | 1 helpful votes


Check you ignition Control Module. It sits under your coils.

GMC Jimmy Cars &... | 30 views | 0 helpful votes


Some fixya user told me a website reliablestore it is very good.. I used it to repair my shredder it had some spark issue which wasn't easily fixed. you can go there and try

GMC Cars &... | 34 views | 0 helpful votes


Does it have manual or automatic climate control system ? Vin C or K 4X4 or 2WD ? Heat shuts off ???? You mean the heater blower motor stops blowing air out of the vents ?

GMC Cars &... | 43 views | 0 helpful votes


Take a close look at the connectors and wiring from the injectors to the computer.Check for a short in the wiring to ground which would cause excessive fuel flow through the injector as this would turn on the injector on the driver side of the wiring.

GMC Cars &... | 46 views | 0 helpful votes


Is it the Bendix? Is your alternator working? Is your fuel pump working correctly. It could be a few things, just troal and error. Good luck.

GMC Acadia Cars... | 33 views | 0 helpful votes


Is the dash light dimmer control turned all the way to off?

GMC Yukon Cars &... | 29 views | 0 helpful votes


Check the switching valve to see if it is working correctly. It could be a bad valve or switch. Also check the fuse. If it is bad, the fuel valve will not switch tanks.

GMC Cars &... | 24 views | 0 helpful votes


Check your multifunction switch to see if the current to the headlamps is going through.

GMC Jimmy Cars &... | 28 views | 0 helpful votes


A bad master switch can do that, remove the switch from the drivers door and check for power and ground at the switch if OK replace the switch. I hope this helps. Take care.

GMC Cars &... | 16 views | 0 helpful votes


hello
u'd need a proper manual for this in my opinion
like there are plenty of dealers and online shops that deal in those..
you can get some free at reliable-store and it;s actually really illustrative

2006 GMC Sierra... | 41 views | 0 helpful votes


located in the back . It's called the LGM fuse #2 (Lift Gate Module) The Lift Gate Module controls the defroster grid circuit.

GMC Envoy Cars &... | 38 views | 1 helpful votes


There's a website that has all this in formation about all this and manuals everything totally free there are many actually but I personally like few reliable-store for eg. .. let me know if u need help
thanks

GMC Sierra Cars... | 36 views | 0 helpful votes


No such code's for your vehicle , cheap code reader ,.Take it to a qualified repair shop that has a professional scan tool . These are the correct code's for OBD2
https://www.engine-light-help.com/gmc-check-engine-light.html

GMC Yukon Cars &... | 32 views | 0 helpful votes


Instrument Panel Fuse Block (Right) The right instrument panel fuse block access door is on the passenger side edge of the instrument panel.

Fuse 21 - Sunroof
Fuse 29 - Radio

See pg 294/5
https://my.gmc.com/content/dam/gmownercenter/gmna/dynamic/manuals/2016/GMC/Yukon/2k16yukonden1stPrint.pdf

Not sure where the DVD player gets power if not w/ sunroof.

GMC Yukon Cars &... | 34 views | 0 helpful votes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2004 GMC Envoy
2004 GMC Envoy

2,171 Questions

2000 GMC Jimmy
2000 GMC Jimmy

1,327 Questions

2002 GMC Envoy
2002 GMC Envoy

1,362 Questions

2003 GMC Envoy
2003 GMC Envoy

1,326 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,099 Questions

Top GMC Experts

Marvin
Marvin

Level 3 Expert

84543 Answers

Brad Brown

Level 3 Expert

18031 Answers

Vincent_G
Vincent_G

Level 3 Expert

2360 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...