General Electric Hardware & Accessories - Answered Questions & Fixed Issues

I found my manual...simplified version: 1) On the panel - press the manual button 3 times until Auto is lit - the remote can now be used 2) press on - on the remote 3) press the desired time (2, 4, 6 or 8 hours) on the remote 4) press repeat on, on the remote Timer should be set!! =) Pressing auto off wipes out anything that was programmed!! Pictures attached!

check repair clinic.com for a new thermostat sensor. Appliance Parts Lawn Mower Parts Heating Cooling Parts 365 day returns

Sounds like you bent the door where the lock is. You might have to replace the door.

You will get one on eBay uk

timer on what ? make, model and age of unit might be useful in forming a coherent response.

http://waterheatertimer.org/How-to-set-timers.html Link above shows hot to set analog timers Gene Water Heater Timers Save Money If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

One of the answer is here https://www.google.ca/search?q=electric+over+comes+on+by+itself&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&channel=sb&gfe_rd=cr&ei=Pv9mVMzjM-GV8Qf7wIGoBQ

See both GE strip timers to identify product:
http://waterheatertimer.org/GE-timers-and-manuals.html#striptimer

GE 15077 digital or programmable strip timer manual
http://waterheatertimer.org/pdf/GE-15077-Manual-eng.pdf

If this manual does not match your timer, add a comment.

If the light remains on, that would indicate the circuit was damaged. The light goes on when the circuit is complete. This usually happens when the burner gets hot. If it caught fire, then the stove is registering it as hot all the time. Elisa Jed ' http://www.atlasappliances.com/en/pg-kitchen-appliances

Take it apart ... insert vacuum hose... also clean vent where it exits house If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

http://waterheatertimer.org/How-to-set-timers.html Gene h If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Generally theben timers are wired same as illustrations shown on following pages Wiring varies slightly by exact model number. http://waterheatertimer.org/How-to-wire-DTD-1440-timer.html http://waterheatertimer.org/How-to-program-Hagar-timer.html http://waterheatertimer.org/Din-rail-timers-and-manuals.html Most these timers are rated 15 amp. Safe maximum :: 15 amp x 80% = 12 amp 230V x 12 amp = 2760 watt For best long-term result, use timer to turn on a contactor (relay) and let the contactor handle switching heavy amp load Fuse-protect the timer by adding inline fuse to hot wire going to timer. Gene If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Yes you can use it with a power strip. The lamp switch should be left in the on position, the timer will turn the power on or of for the power strip. Also make sure the power switch of the power strip is in the on position also.

http://waterheatertimer.org/How-to-wire-240-volt-outlets.html Usually there are 3 screws in a row. The cord has 3 wires in a row. Connect either outside wire to either outside screw. Connect center wire to center screw. Look at type of plug on cord. Gene h If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

http://waterheatertimer.org/How-to-set-timers.html gene If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

http://waterheatertimer.org/Woods-timers-and-manuals.html http://waterheatertimer.org/How-to-set-timers.html Gene h If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

my ge dryer working but the clothes is wet and dryer is stoped wieh in 7 miniute

On the following site you should find your timer and instructions on how to set it up correctly. http://waterheatertimer.org/GE-timers-and-manuals.html

Try resetting timer, and reprogramming. The GE brand of electronic box timers is not dependable long-term product. The 30-40 amp contact ratings do not appear consistent with rest of timer quality. I think the amp load is overrated from what I have seen, compared with heavy duty timers like Intermatic GM40AVE series etc. My local home depot has replaced the GE line of box timers with 100% reliable Intermatic T100 series mechanical timers. http://waterheatertimer.org/GE-timers-and-manuals.html#15136 15136 is not battery-operated timer, and there are no repair parts. 15136 timer is rated outdoors, with temperature range -40F to +130F, which sounds like hardened electronics. But often these cheaper electronic devices with plastic gears and multi-voltage are not hardened for years of dependable service as found with commercial grade timers. Nor are they protected from surge caused by local power outage or nearby lightning strike. For most dependable timer, and cost effective, choose T100 series or T170 series with skip-a-day... repair parts available... timer will last decades http://waterheatertimer.org/Intermatic-timers-and-manuals.html#T100-series Gene h If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Identify timer. Replace battery. Do not use battery-operated timer in cold environment... look for temperature range when selecting timer. Mechanical timers will work in cold temps. Or buy another timer to replace defective timer http://waterheatertimer.org/Intermatic-timers-and-manuals.html http://waterheatertimer.org/Woods-timers-and-manuals.html Gene h If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7