General Washing Machines - Page 4 - Recent Questions, Troubleshooting & Support

Hello
Remove the detergent tray and look in to the top were the tray goes in there is a water dispenser there with a lot of hole check that non of those holes are not blocked, if so use a tooth brush to clean the holes.
Thanks

Google search gives this http://bsintek.basco.com/MDEXResultsPages/PDFDisplayPage.aspx?fileName=ilmtFI25YmTPq79DteBc

Change out your fill switch.

Hello there and welcome to fixya You may want to try unplugging the machine for a minimum of 2 hours to let the internal cpu to reset itself then plug it back in then press the mode button then try to lock the door and it should be ok after that ok please inform me how this goes there is more we can do for this ok Best regards Michael

If the cycle is done, sounds like your door switch could be sticky,. If there is water in it, it will have to pump out the water to a certain level before the door will open, removal of the water would be your issue or the pressure level switch thinks is not drained out, in which would be a pressure switch.

Go to kenmores site and download the manual