General Cooktops - Recent Questions, Troubleshooting & Support

how to unlock ilve induction cooktop

Had the same problem after overusing one of the bigger elements on my bellini induction stove / cooktop to boil copious amounts water. Element eventually stopped working and would just flash power level similar to when it cant recognise an induction pot, but also made a clicking noise over and over. My solution was to turn mains power off at meter box, and back on to reset the stove. When power came back on stove was working again! might have reset some sort of cutout sensor inside stove but cant be certain. Anyway, worked for me so give it a go and see if it helps. good luck.

Are the batteries good?

Are you sure you got the right burners. Sounds like they gave you a 220 volt burner with one wire red and the other black.

you need to check the piezio electric ignitor wires under the top range cover: High resistance or, leakage in them or, improper grounding at the ignitor can weaken the spark. My range cover is easy to remove: mine has screws under the range top burners and, the top front just tips up after they are removed; but, without seeing yours; I do not know how the top cover is removed on your model however; GE can be reached at: 1-877-959-8688 to order a manual. hope this helps.

try putting it in a solution of muratic acid and water let sit for ten minutes then rinse real good. If any particles are in the oriface this will clean it out.

well there must b some problem with ur wiring and u should read the manual rite.then try